Brisk spark plug issues

Anyone else having issues with Brisk Spark Plugs? Here's the background on my issue... A month ago I had misfire issues on cyl 2. Swapped plug to cyl 3 and it kick a CEL on that Cyl for misfire. Pulled all plugs and replaced with the Brisk RR14YS plugs gapped to .030. No more CEL after the new plug swap. Fast forward to today and I got a misfire on cyl 5. So I decided to swap that plug to cyl 6 and sure enough it got a misfire on that cyl. So I ordered some new ones... This is annoying.

No issues with mine. I believe I gapped mine to .032. Think I'll pull them this evening just to check, but car runs great. I'm at about 1000 miles on them including several hard 1/2 mile pulls.

Yeah I don't know what caused one of the new plugs to shit itself....

How do you gap your plugs? Did you bang the ground strap on a bench? Improper gaping causes damage to the plugs. Im not saying that's the problem just bringing it up

Gapped them with the gapping tool I use. Never banged them around.

No misfire until one of the Brisk ceramic pieces broke around the electrode. I am running NGK now.

NGK here also no issues on 3 f/i coyotes

I had brisk plugs and no problems , I just changed them to 6510 NGKs ... So far so good ..

all we run is brisk

works great at 7.71 in the 1/4......

That's cool people are running them as I was told I should run them. Just odd how this is the second plug to shit itself. Literally one month today.

Jeff_oddo said:

That's cool people are running them as I was told I should run them. Just odd how this is the second plug to shit itself. Literally one month today.

Click to expand...

I can send you two. Mine were in the car for about 10 days before my first failure and at 9 bucks a pop it was a waste of money. Brisk never replied to my emails with pictures.

if you guys have issues let me know.

i'll get in contact with brisk,

I just ordered some new ones.... I need my car and thankfully I have my wife's car to use in the meantime

Jeff_oddo said:

I just ordered some new ones.... I need my car and thankfully I have my wife's car to use in the meantime

Click to expand...

NGK ftw

Rintegration said:

NGK ftw

Click to expand...

Just installed some NGK 6510's this afternoon and right off the bat the car was idling a lot smoother than before with the Brisk plus when they were new. I'll see tomorrow when I go drive it how it feels and performs. I still have to do some WOT datalogs.