Sponsored

TR6060 Swap Guide

whatsup62

Well-Known Member
Joined
Sep 16, 2015
Threads
129
Messages
2,046
Reaction score
522
Location
Jupiter
Vehicle(s)
2015 Mustang GT PP (Gone but not forgotten).
I am still getting use to mine. It pulls forever with the 3.73's...might go the 3.91 route myself..not sure yet.
The 13-14 GT500's came with 3.73's and the 2.66 first gear...so Ford thought it would work.
There really isn't to much difference in the gearing between the different years other than first gear.
chart.jpg
Sponsored

 

Evo_Rob

Mmm... Boost...
Joined
Sep 21, 2015
Threads
14
Messages
1,185
Reaction score
405
Location
Virginia Beach
First Name
Rob
Vehicle(s)
2016 Mustang GT
I am still getting use to mine. It pulls forever with the 3.73's...might go the 3.91 route myself..not sure yet.
The 13-14 GT500's came with 3.73's and the 2.66 first gear...so Ford thought it would work.
There really isn't to much difference in the gearing between the different years other than first gear.
The 13-14 GT500's also came with a significantly larger engine which means more umph down low. Maybe not much more, but enough to note
 

rakin.it.in

Stallion Kings
Joined
Mar 3, 2015
Threads
13
Messages
71
Reaction score
13
Location
Daly City, Ca
First Name
Daniel
Vehicle(s)
Whippled 2015 Mustang GT Premium PP
Just got confirmation from Ben Calimer regarding the gear ratio. The 5th and 6th gear ratios are in fact 0.74 and 0.50 which I'm happier with (MORE MPG...lol). I'll be going with 4.09 gear set from Ford Performance along with the recommended installation kit and bearing & seal kit.

Now, differential and transmission fluid choices. I'm considering Motorcraft 1.6qts of 75W-85 & 4oz friction modifier for the differential. For the transmission, I see many going with Mobil1 Synthetic Mercon filling it up to 3.45 qts or until it drips out (jacked and leveled car). Since most of us here are well over 600 rwhp, curious to know what you guys are running. What worked and what didn't.
 

SC_Ruby

Well-Known Member
Joined
Jun 1, 2015
Threads
24
Messages
1,891
Reaction score
1,225
Location
Garden Grove
First Name
Dennis
Vehicle(s)
2016 GT Premium PP Ruby Red
[MENTION=14291]rakin.it.in[/MENTION] I'll be going with the Amisol Manual Syncromesh for the transmission and the Amisol Severe Gear 75/90W for the differential :thumbsup:
 

EastTNMustang

Well-Known Member
Joined
May 14, 2017
Threads
3
Messages
242
Reaction score
108
Location
Knoxville, TN
Vehicle(s)
2017 Roush Stage 3
I am still getting use to mine. It pulls forever with the 3.73's...might go the 3.91 route myself..not sure yet.
The 13-14 GT500's came with 3.73's and the 2.66 first gear...so Ford thought it would work.
There really isn't to much difference in the gearing between the different years other than first gear.
13-14 GT500s did not come with 3.73 rears...they had 3.31s
 

Sponsored

Strokerswild

Shallow and Pedantic
Joined
Nov 7, 2014
Threads
74
Messages
6,612
Reaction score
5,396
Location
Southern MN
First Name
Dave
Vehicle(s)
Things With Wheels

Tommy V

Well-Known Member
Joined
Jul 24, 2014
Threads
72
Messages
3,653
Reaction score
601
Location
Brookly park Md
First Name
Tommy
Vehicle(s)
2015 race red gt pp manual, recaros, 401al DOA "too much boost on 93", 2017 GT Auto
Thats why i dont understand why 331's wont work with the 6060,they worked good in the gt500.And these s550's are putting some hp/tq down,im almost at 600 to the wheels.I know the gt500 came with 331's my buddy has one.
 

whatsup62

Well-Known Member
Joined
Sep 16, 2015
Threads
129
Messages
2,046
Reaction score
522
Location
Jupiter
Vehicle(s)
2015 Mustang GT PP (Gone but not forgotten).
When i got my 6060 from Ben i asked him. He said people were having good results with Amsoil ATF...picture below. That's what I am running. Running severe gear 75/90wt in rear. I also am pretty positive that i will be moving to the 4.09. Now that I have put a lot of miles on the car the 3.73's just aren't cutting it for me. I dont know how in the heck 3.31's would work...:shrug:
18052899_10154625120377992_1388387153_n (1).jpg
 

olaosunt

Well-Known Member
Joined
Jan 10, 2015
Threads
71
Messages
4,284
Reaction score
1,556
Location
Indiana
Vehicle(s)
Guard,base,M6,KB-2.DIB,auto,Hellion TT,2016 GT 350/Gen 3 Whipple ,2018 Mustang GT/Gen 5 Whipple
If you are drag racing , you could trap 140+ @7500 in 3rd gear with 3.31's(28 inch tire)
One less shift but it may be a dog getting out of the hole .
I am going to leave my 3.31 at first when I swap in my Tremec with 2.66 first gear just to see but I am sure I will eventually swap in 4.10's.
 

Sponsored

EastTNMustang

Well-Known Member
Joined
May 14, 2017
Threads
3
Messages
242
Reaction score
108
Location
Knoxville, TN
Vehicle(s)
2017 Roush Stage 3
When i got my 6060 from Ben i asked him. He said people were having good results with Amsoil ATF...picture below. That's what I am running. Running severe gear 75/90wt in rear. I also am pretty positive that i will be moving to the 4.09. Now that I have put a lot of miles on the car the 3.73's just aren't cutting it for me. I dont know how in the heck 3.31's would work...:shrug:
What about the 3.73s don't you like? Poor starting performance or...?
 

whatsup62

Well-Known Member
Joined
Sep 16, 2015
Threads
129
Messages
2,046
Reaction score
522
Location
Jupiter
Vehicle(s)
2015 Mustang GT PP (Gone but not forgotten).
What about the 3.73s don't you like? Poor starting performance or...?
Yes..I have the 2.97 first gear as well. Just takes a lot more to get the car moving. For hwy pulls its awesome. The 0.5 6th gear is worthless....car just lugs unless you are doing 80-90 mph.
 

rakin.it.in

Stallion Kings
Joined
Mar 3, 2015
Threads
13
Messages
71
Reaction score
13
Location
Daly City, Ca
First Name
Daniel
Vehicle(s)
Whippled 2015 Mustang GT Premium PP
For those interested in seeing gear ratio options for your TR6060 assuming a 28" tire, I attached a PDF copy of my spreadsheet. There is two sheets to view depending on the finals gears that your tr6060 may have. Overall I used the tremec calculator as I liked how it spits out the info.

Hope this is useful to others.
 

Attachments

tsloms

Well-Known Member
Joined
Jan 3, 2016
Threads
8
Messages
406
Reaction score
110
Location
Wisconsin
Vehicle(s)
2016 Mustang GT Magnetic PP
Just a note that I've been attempting to install my 6060 for the past couple days without success. I've been able to get the tranny only about 3/4" away from the engine and it won't go in any further.
After a call with McLeod today they stated that with this combo it is mandatory to use the 2010-2014 GT500 throwout bearing as it is about 1" shorter than the GT one. I have one in order now and will try to install it again in a few days.
I just wanted to clear up that the GT bearing will not work with the McLeod GT500 RXT clutch.
 

jhatley7

Well-Known Member
Joined
Dec 18, 2015
Threads
15
Messages
1,150
Reaction score
390
Location
Texas
Vehicle(s)
2016 White GT PP, 2022 F350
Hmmm, I swapped everything over from my MT-82 with out issue.
Sponsored

 
 




Top