MELLOWYELLOW06
MELLOW 2.0
- Joined
- Jun 13, 2013
- Threads
- 36
- Messages
- 2,784
- Reaction score
- 953
- Location
- West Los Angeles
- Vehicle(s)
- 2015 TY GT PP
Car looks amazing.
The 6GR's look at home on the 18!!!
The 6GR's look at home on the 18!!!
Sponsored
WordCar looks amazing.
The 6GR's look at home on the 18!!!
Owners have gone up a 295, even 305 on factory wheels, however you do get the tires to bulge out from the wheels.What are the largest tires you can fit on a non-PP GT with the stock wheels?
Hard to tell due to the gap but is there a lot of poke?Exclusively for 6G members, see it first here!
Worlds first 2018 Black Ford Mustang GT on 345's rear tires.
The newly re-design body looks very sexy with the Project 6GR wheels in Gloss Black.
Let us know what you think of this combo?!
See the full photo shoot here: Flickr
Click Below
Wheels: Project 6GR
Finish: Gloss Black
Size: 19x10 / 19x11.5
Tires: 275/40 | 345/30
Tire poke is minimal. This one is stock suspension. The owner will be getting Accuair management bags and airlift struts. Hopefully we can grab some shots once the new suspension comes in and adjust the camber.Hard to tell due to the gap but is there a lot of poke?
Also what camber are you using (love the idea of a 11.5” wrapped in 345s)
I wouldn't recommend using stock lugs on any aftermarket wheel.can you use stock lug nuts with the MRR M600 wheels?
You will need 14mmx1.5 aftermarket Lug nuts.can you use stock lug nuts with the MRR M600 wheels?
Bueller?For those running a rear 345, how much camber are you running? About to order a set of MPSS in 345/30 R19 to go on VS Forged 19 X 11.5 wheels. I'm lowered 0.5" with BMR rear springs.
^ This...Bueller?
Hopefully I get them mounted tomorrow. Didn't get a concrete answer but heard - 2 from Paul so that's what I'm going with. I'll let you know once they're up on the car.^ This...
I’m in a similar boat. Same springs, same mounts and 5 spoke 6GRs with 325/30 in the back. I’ve believe -2 camber in the rear has been recommended by Paul and need4speed. Is this correct?
Hello the 325/30 should not need any camber.^ This...
I’m in a similar boat. Same springs, same mounts and 5 spoke 6GRs with 325/30 in the back. I’ve believe -2 camber in the rear has been recommended by Paul and need4speed. Is this correct?