Widening factory wheels *new topic*

I posted about this months ago but would like to start a new thread as I'm very strongly considering this. Can any of the wheel gurus chime in on what I'd need as far as a spacer, etc., or if I'd have any clearance issues widening my rear 50th AP wheels to be a 19x10 or 10.5. I'd like to stick a 305 tire (or close to it out back).

Thanks!

Contact weldcraft And they will help you with all technical questions

MELLOWYELLOW06 said:

Contact weldcraft And they will help you with all technical questions

Click to expand...

I did and they couldn't answer my questions. They just said that fitment of any modification I have them do is my sole responsibility. I just looked and it seems the offset on the 50th AP wheels is +42.5

Visually inspect the amount of inboard tire clearance. If you have 1" inboard tire clearance and you widen your wheels by 1"(all of which would go on the inner rim) you will need a 1" spacer to maintain the same amount of inboard tire clearance.