20x10.5 up front?

Andy17GT · Feb 9, 2018

I’m looking to do a square set up. I know most guys aren’t going this wide on the front but I’m wondering if anyone can comment who has. Itd be 20x10.5 all around, probably with 275/35r20 tires but not sure yet. Wheels have +20 offset and this is for a 2017 GT base. Daily driver. Help and advice needed, thanks!

JuRuKi · Feb 9, 2018

I have 19x10.5 +32 all around and it fits just fine but your setup will stick out a half inch more than mine and mine is already close to rubbing. Im lowered running -2 camber front and -2.5 camber rear with 285/35/19 tires.

Paul@PKAUTODESIGN · Feb 9, 2018

Andy17GT said:
I’m looking to do a square set up. I know most guys aren’t going this wide on the front but I’m wondering if anyone can comment who has. Itd be 20x10.5 all around, probably with 275/35r20 tires but not sure yet. Wheels have +20 offset and this is for a 2017 GT base. Daily driver. Help and advice needed, thanks!

I have done it before and it works

20x10.5 ET 25-30

275/35/20 or 285/30/20

Thats the sizing you want to go with.

VibeMotorsports · Feb 9, 2018

Yes, 20x10.5+25-30mm is good.

BlownGP · Apr 8, 2018

What about +35?

Would it not clear the suspension? That's why you are saying stay around +25-30?

Kinjirra · Apr 8, 2018

I'll be putting on a set of 20x10.5 tomorrow most likely up front. 305/30/20 squared. May take a few days but I will try to get pics up.

BmacIL · Apr 9, 2018

BlownGP said:
What about +35?

Would it not clear the suspension? That's why are saying stay around +25-30?

Need a +33 at a minimum. It'll be very close with a wide tire. Effective +25-30 (could include a spacer) is what you want.

S550GTCS · Apr 9, 2018

19x11 et30 here. 315/30/19 MPSC2 tires. Barely clears.

msweet · Apr 9, 2018

would be good to get some more photos from people running 10.5" up front, with offsets and camber specs included

at this stage my plan for the next car is 20x10.5 +32 with a 275/35 up front, and 20x11 +45 with a 285/35 out back

BlownGP · Apr 9, 2018

BmacIL said:
Need a +33 at a minimum. It'll be very close with a wide tire. Effective +25-30 (could include a spacer) is what you want.

I might do a spacer 5mm spacer. Good idea..

Thanks

What about the rear.
Same size (20x10.5) but with a +42 offset. Would it stick out too much?

BmacIL · Apr 9, 2018

BlownGP said:
I might do a spacer 5mm spacer. Good idea..

Thanks

What about the rear.
Same size (20x10.5) but with a +42 offset. Would it stick out too much?

No it won't stick out at all actually. It'll look nice.

BlownGP · Apr 18, 2018

Kinjirra said:
I'll be putting on a set of 20x10.5 tomorrow most likely up front. 305/30/20 squared. May take a few days but I will try to get pics up.

Got some pics

Swedish_Fries · Apr 19, 2018

Paul@PKAUTODESIGN said:
I have done it before and it works

20x10.5 ET 25-30

275/35/20 or 285/30/20

Thats the sizing you want to go with.

Paul I need to call on your experience. Are the airlift bags wider than say BC coils? Would 19x10.5+32 have clearance issues in the front?

Kinjirra · Apr 20, 2018

BlownGP said:
Got some pics

I'm putting my steeda springs and shocks on this Sunday. I will have finished pics up soon as I figure out how to put them up.

So far the wheels looks mean. Sits nice and flush with the fenders.

Paul@PKAUTODESIGN · Apr 21, 2018

Swedish_Fries said:
Paul I need to call on your experience. Are the airlift bags wider than say BC coils? Would 19x10.5+32 have clearance issues in the front?

Do you mean the strut itself or the bag, because the bags are wider yes sir.

But the strut I believe is the same diameter.

20x10.5 up front?

Andy17GT

Member

JuRuKi

Well-Known Member

Paul@PKAUTODESIGN

The Wheel guy

VibeMotorsports

Well-Known Member

BlownGP

Well-Known Member

Kinjirra

I R Slow

BmacIL

Enginerd

S550GTCS

Well-Known Member

msweet

Well-Known Member

BlownGP

Well-Known Member

BmacIL

Enginerd

BlownGP

Well-Known Member

Swedish_Fries

Function and Form

Kinjirra

I R Slow

Paul@PKAUTODESIGN

The Wheel guy