BMR Tech
Well-Known Member
- Joined
- Sep 4, 2014
- Threads
- 168
- Messages
- 5,141
- Reaction score
- 3,691
- Location
- Tampa, FL
- Website
- www.bmrsuspension.com
- First Name
- Dion
- Vehicle(s)
- 2018 GT, 2010 GT500, 2019 F-150 5.0
- Thread starter
- #1
These came in for my street/track car build - so they are focused more on handling than anything else.
These are a new valving of the Crusader line of shocks, which is designated "AK"
I chose to use a 9" tall 300lb/in spring for now. This should pair well with the BMR SP085 980lb/in rear Linear springs, and Viking Crusader shocks out back as well.
In the future when I step up my game, I will likely be moving to a spring in the 400lb/in range....but these should do the trick for now.
I will also be using the BMR Caster Camber plates, designed for use with the Viking Coilovers.
:cheers:
These are a new valving of the Crusader line of shocks, which is designated "AK"
I chose to use a 9" tall 300lb/in spring for now. This should pair well with the BMR SP085 980lb/in rear Linear springs, and Viking Crusader shocks out back as well.
In the future when I step up my game, I will likely be moving to a spring in the 400lb/in range....but these should do the trick for now.
I will also be using the BMR Caster Camber plates, designed for use with the Viking Coilovers.
:cheers:
Sponsored