Sponsored

test

Thread starter strengthrehab
Start date Nov 2, 2017
Watchers 1

strengthrehab

Well-Known Member

Thread starter
#1

Sponsored

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)

OP

OP

strengthrehab

Well-Known Member

Thread starter
#2

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)

OP

OP

strengthrehab

Well-Known Member

Thread starter
#3

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)

OP

OP

strengthrehab

Well-Known Member

Thread starter
#4

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)

OP

OP

strengthrehab

Well-Known Member

Thread starter
#5

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)

Sponsored

OP

OP

strengthrehab

Well-Known Member

Thread starter
#6

https://photos.app.goo.gl/IFtdUfxpVJ7BIBL32

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)

OP

OP

strengthrehab

Well-Known Member

Thread starter
#7

Sponsored

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)

You must log in or register to reply here.

Share:

Facebook Twitter Reddit WhatsApp Email Link