Bill88stang
Well-Known Member
thanks bud ill let you know how I like it, you have the runners locked out on yours right?
Sponsored
yes sir they are locked. really funny looking on the car with the actuators missing. I've had no issues with them being locked out at all. my gas mileage has went down a little the last few days because of my heavy foot on the highway.thanks bud ill let you know how I like it, you have the runners locked out on yours right?
More important than the actual peak gains is how much longer and flatter the peak will be. Huge difference! Instead of quick climb to peak, and quick drop off it will be at higher power longer, and the extended rpm range will not drop as low when shifts.the couple dyno runs I've seen are showing about 50 wheel over the stock 15-17 mani.
Have you done aftermarket OPG/CG? Any plans to?finally got to a WOT run from a dead stop yesterday with the car shifting at 7800 RPM's, holy s'nikes does she boogie now!
no sir, didn't mean to run it up that high, with the Bama tune the car shifted earlier than with the VMP. Only if I can convince the wife to let me get a blower.Have you done aftermarket OPG/CG? Any plans to?
Go with the lockouts and call it a day man.18 mani has been sitting and I’m a bit hesitant with all the codes and stuff ppl are getting with the pigtails. Read all 90+ pages and seems like the lockouts don’t have issues.
I have the HellhorsePerformance “plug and play” kit- 2 pigtails w/ connectors at the ends. Is anybody running these Lund tuned without issue?
I have the Plug and Play harness with the Y connector sitting here as well. After talking with a few well-known coyote tuners the consensus seems to be lock it out as far as driveability and tuning. For some reason even with the correct wiring it just doesn't work right. I'm going to save myself the aggravation and just lock them out and be done.18 mani has been sitting and I’m a bit hesitant with all the codes and stuff ppl are getting with the pigtails. Read all 90+ pages and seems like the lockouts don’t have issues.
I have the HellhorsePerformance “plug and play” kit- 2 pigtails w/ connectors at the ends. Is anybody running these Lund tuned without issue?