Wheel and tire setups

Hey everyone,
Im new to this forum, been looking around for some new wheels and tires, Id like to run them square. Anybody running 20x10 +40 offset all around? Id like to fit 295/35(or 30)/r20, any thoughts on that? My car is stock height too!
thanks

Well, I'm close to that. I'm running 20x10s' in the front with 285/35's with +35 offset. I'm lowered as well with no issues. I'm wider int he back, though.

dsco8 said:

Hey everyone,
Im new to this forum, been looking around for some new wheels and tires, Id like to run them square. Anybody running 20x10 +40 offset all around? Id like to fit 295/35(or 30)/r20, any thoughts on that? My car is stock height too!
thanks

Click to expand...

A number of members run 20x10 ET 35-40 normally we do a 285/35/20 tire.

What kind of wheel are you thinking about?

Large and Square

Just checking how large a tire/wheels folks have on the front of their S550. I have a 2018 GT PP1 coming in three weeks and want to get as much rubber underneath as I can with a square set up. That leaves the fronts the issue. With the PP2 tire so big, I figured 295/35s would work on 19x10 rims. I'm thinking MRRs GT350 style wheel.

Anyone got big a$$ wheels/tires up front?

20" wheels get old fast. 19" is where it's at.

See here for 19x10.5 ET35: https://www.mustang6g.com/forums/showpost.php?p=1677264&postcount=37

wildcatgoal said:

20" wheels get old fast. 19" is where it's at.

See here for 19x10.5 ET35: https://www.mustang6g.com/forums/showpost.php?p=1677264&postcount=37

Click to expand...

Agreed. I would only increase the diameter to accommodate larger rotors, but 15" rotors are plenty big. My guess is the 10.5" PP2 fit, so a 10" rim up front is fine.

Anyone know if the MRR 10" GT350 wheels look good in the back...spacing and all?

If any of y'all have pictures of your setup, Please post them!!