Official MRR M600 Flow forged Wheel Pre Order Thread | Grab A set before their Gone !

Any pics of the M600 mounted on an Ingot Silver ?

Still loving these wheels (and tires) I got from Paul at PKAuto Design, with help from Carlos y sus amigos. 20x10 front, 20x11 rear, both +35 offsets. 285/35 front, 315/35 rear. Continental Extreme Contact Sport's.

Looks awesome!

So i finally figured out how to post pics since photobucket shit the bed pretty much. The wheels are back off and I’m hoping weather gets nicer so i can enjoy them again soon. Don’t wanna run the Firehawks in the cold rain. It’s been no warmer than 51 and mostly 40s so too cold for the summer rubber IMO. Especially if i want them to last a decent amount.

Are these gunmetal/graphite or special color ?
And are gunmetal and graphite same color and just other naming on different sites selling them?

Often the gunmetal/graphite color is used interchangeable on the 600 and other of this style wheel. There are custom powdercoats on the m600 that are gunmetal but not graphite. (Brushed for example.) If I'm not mistaken the standard black and graphite finishes are not done in house by MRR like their other wheels. I have the graphite and the finish seems good but it is visibly missing around the lugs and is too light in some lighting. Although in other lighting it is spot on with what I was expecting when I ordered. So far I really like the wheels. Almost wish I would have requested one of the custom finishes though. Either the crystal or the brushed gunmetal.

UNtamed67 said:

Are these gunmetal/graphite or special color ?
And are gunmetal and graphite same color and just other naming on different sites selling them?

Click to expand...

randy_tho said:

Often the gunmetal/graphite color is used interchangeable on the 600 and other of this style wheel. There are custom powdercoats on the m600 that are gunmetal but not graphite. (Brushed for example.) If I'm not mistaken the standard black and graphite finishes are not done in house by MRR like their other wheels. I have the graphite and the finish seems good but it is visibly missing around the lugs and is too light in some lighting. Although in other lighting it is spot on with what I was expecting when I ordered. So far I really like the wheels. Almost wish I would have requested one of the custom finishes though. Either the crystal or the brushed gunmetal.

Click to expand...

Where did you order and is there an extra cost for a special color ?
I find them a bit to dark for an Ingot Silver and would like the same tint as the original wheels.

UNtamed67 said:

Where did you order and is there an extra cost for a special color ?
I find them a bit to dark for an Ingot Silver and would like the same tint as the original wheels.

Click to expand...

Paul. I'm not sure if they get tinting done at MRR or do it in house. I think they order it from MRR.

Did you have to order special lug nuts? and is ET35 fitting directly on the car ?

I'm running 19x10 all around. Fitment is good. The lug nuts we're included but are the 14mm spline. Included the socket. On my offset I think a slightly longer nut would look good as the 1.5 are pretty much unseen.

[quote=UNtamed67;2213281]Did you have to order special lug nuts? and is ET35 fitting directly on the car ?[/quote]

Dropped a message to MRR wheels to find out more about color possibilities.

I have 19x10 as well. And yea you can’t see the lugs really. It’s all good though. I love the color. But i may get them painted a hyper silver as i have the stock PP wheels in Silver and i love the look.

Still recovering from Fab Ford's but here they were on display in the AM and as the show ended.

I've ordered a set at Paul's in 19x10 in powder coated liquid silver.
Just wonder if i could keep my current Michelin SS4 in 255x40 on the front and buy new 275/35 SS4 in the rear? is a mix of 35 front and 40 rear ok?