TP-8250
Member
- Joined
- Dec 21, 2016
- Threads
- 1
- Messages
- 6
- Reaction score
- 1
- Location
- Chesapeake VA
- Vehicle(s)
- '16 GT-350 TP
- Thread starter
- #1
16' Track pack owner here. After owning the car for almost a year I may have used the radio once...maybe twice? Would I really miss it if it wasn't there? No. Maybe the backup camera but the only place this car backs into is my garage so I can live with that. And honestly having all those number buttons and such in the center stack simply made it look too cluttered...dare I even say ugly. So I played around with a bunch of ideas and finally put this bezel cover together. I promised myself that it had to look like it could have come that way from the factory or it won't go in the car. It's a cut down piece of abs plastic which I wrapped in a faux suede cloth and attached it to a spare base radio bezel which I cut/modified to remove the trim around the screen and buttons. I have some black piping coming in to install around the edges to clean up some of the unevenness of the wrap job - will share those pics once it comes in and gets attached. So what's the verdict? Clean enough to go into the 350 or stay away? Too tacky? Open to suggestions on design changes as well.
If I decide to keep it I'll most likely get a new radio bezel and do the work all over again since all the pieces are a bit rough given this was the first attempt. Now that I know what to do and to do it, I should be able to make this look even cleaner.
If I decide to keep it I'll most likely get a new radio bezel and do the work all over again since all the pieces are a bit rough given this was the first attempt. Now that I know what to do and to do it, I should be able to make this look even cleaner.
Sponsored
Last edited: