jbailer
Well-Known Member
Mine has it, here's mine:Could you please post your entire PAM, or the complete 736?
I'm looking to enable the obstacle detection, as mine is not active.
Sponsored
Mine has it, here's mine:Could you please post your entire PAM, or the complete 736?
I'm looking to enable the obstacle detection, as mine is not active.
This didn't work for me :(This one works straight for the Mustang.
I was using resistors to avoid hyper blinking but I didn't like them as they would get extremely hot.
Made the changes, removed the resistors and now it doesn't hyper blink.
Oh no! I was going to pull my resistors out and do this. I wonder why it didn't work? I went through a lot of effort to get them wired in there. I'd hate to pull them out and find out it doesn't work.This didn't work for me :(
Mine was 0, I made it 1 and nothing changedOh no! I was going to pull my resistors out and do this. I wonder why it didn't work? I went through a lot of effort to get them wired in there. I'd hate to pull them out and find out it doesn't work.
It should have been the opposite but it doesn't matter I guess. He said 1=outage 0=no outage. The way I would read that is if it is set to 1 and there is an outage, it will hyperblink to alert you. 0 turning it off and not warning of an outage. Maybe I'm reading it wrong? It doesn't matter much if you had the hyperblink with it set to 0 then changed it to 1 and it still blinked. You didn't by chance try disconnecting the battery and reconnecting it afterwards did you? Do you think maybe it requires some kind of reset?Mine was 0, I made it 1 and nothing changed
Question about the PAM:Figured out 2 things:
1. Rear parking aid, got a little car icon with rear indicators when reversing:
PAM (Parking Aid Module)
736-01-01 XXXX XXXB XX
2. Sync 3 radio channel label replaces the frequency when the channel has RDS:
APIM
7D0-01-01 XXXX XXXX 1XXX
I just looked at [MENTION=8977]fionic[/MENTION]'s profile and it says he's been offline since November 15th. Maybe he got a job working for the Trump admin?We absolutely need to keep track of all these codes in an excel spreadsheet but the one in first post is not editable by us.
Yes you must have the sensorsQuestion about the PAM:
In order for that to work, does the vehicle also need to have the rear sensors in the bumper cover (as well as associated modules)?
Likely because of your adapter. I get 23 modules.so with the extended licence installed i decided to plug in my old vgate and see what happens. I was able to get the fogs w turn signal and the dark car to work! It was allot easier than i thought it would be. there were pull downs for a bunch of items and i just picked enable or un enable to change them.
It seems that while it finds or identifies the PCM and BCM i can only make edits to the BCM, or perhaps i am missing how to do it. This is my first time using this...
I do have a new adapter on the way (the one mentioned in the first post). if its a shortcoming of the adapter ill give it another shot in a couple days.
https://www.dropbox.com/s/v877x3biryp9btr/IMG_20170227_162556291_HDR.jpg?dl=0
Cool that would be great. I've got this one coming https://www.amazon.com/gp/aw/d/B006NZTZLQ/ref=ya_aw_od_pi?ie=UTF8&psc=1Likely because of your adapter. I get 23 modules.
Nice! That's gotta be the most popular one but very expensive. Good if you use Android though so you can use it on the phone mobile app too although can't program with the mobile app.Cool that would be great. I've got this one coming https://www.amazon.com/gp/aw/d/B006NZTZLQ/ref=ya_aw_od_pi?ie=UTF8&psc=1
Is that obstacle detection intended to work also in sync 2? Because I have parking sensors, car icon and all that stuff but no obstacle detection.Yes you must have the sensors
I think you might have found something new.Figured out 2 things:
1. Rear parking aid, got a little car icon with rear indicators when reversing:
PAM (Parking Aid Module)
736-01-01 XXXX XXXB XX
2. Sync 3 radio channel label replaces the frequency when the channel has RDS:
APIM
7D0-01-01 XXXX XXXX 1XXX
Here's mine:I think you might have found something new.
Mine looks like this
I'm missing the obstacle detection on the camera feed, I do have obstacle detection on the car icon.
My PAM looks the same as yours, so the difference might be on the APIM.
Could you please share:
7D0-01-01
7D0-02-01
7D0-04-02
Thank you.