@R8CEHORSE OEM+ Track Build

when I did the bushing I was crying and cursing at the same time to get the small part in.

Scurd Racing said:

when I did the bushing I was crying and cursing at the same time to get the small part in.

Click to expand...

I took off the rear wheels and used a C-clamp with some silicon grease and it was like a lubricated condom, a little awkward but it gets you in

For me the hardest part was aligning the rear subframe with the alignment kit in. It was just me doing that part so it was really difficult to manage all 4 corners.

03/31/18: I started the car show season with my car club, "The Board" at the "Show & Shine" at Sonoma Raceway. It was a car show/drags benefitting the Sonoma County Children's Charities. Great cars for a great cause!

04/12/18: Got the roof and lower valance wrapped. I'll snap some better pix soon.

2morrow said:

04/12/18: Got the roof and lower valance wrapped. I'll snap some better pix soon.

Click to expand...

Oooooooooooo, I like it. Does vinyl actually stick on the plastic trims for our ponies? Or did they have to sand it down or apply some kind of adhesive promoter?

Mootang said:

Oooooooooooo, I like it. Does vinyl actually stick on the plastic trims for our ponies? Or did they have to sand it down or apply some kind of adhesive promoter?

Click to expand...

The shop I went to didn't have to use any sanding or promoter.

04/15/18: Fab Fords!!!

https://flic.kr/s/aHsmgvjBav

04/21/18: Started off with my first Auto-X of the season which was a blast and full of crazy antics. This year's field is full of competitive
machines and drivers. The new Steeda IRS parts worked great and kept the rear end planted allowing me to put good power down.

After that I took a drive through wine country and met up with my club, The Board . We took more pix & started to plan our next event.

Stay tuned, more cool stuff coming soon!

04/21/18:More shots from the Auto-x

05/03/18: I've been keeping this quiet but I can't contain my excitement anymore. I'm very happy and grateful to announce that I partnered up with
the fine folks at Steeda Autosports! They supplied me with Competition Springs, Adjustable dampeners, Rear shock mounts, Camber plates, Rear
dust boots, some very cool shirts and decals.

As you all know I run pretty much all of their chassis stiffening products and have been very happy with the quality and performance of their pieces.

A big thank you to [MENTION=7748]tj@steeda[/MENTION] , [MENTION=25806]SteedaTech[/MENTION] , Mike D., Brian D., Jigar P and Frank for all their help and knowledge!







Auto-X and track shakedown happening soon!

like i said , bad ass!

Installed, aligned and waiting for this weekend's Auto-X! A huge shot out to [MENTION=20657]db252[/MENTION] for the install and letting me use his awesome lift as well as destroying his weekend plans (oops).

05/10/2018: Something happened today... Track set ordered. :eyebulge: Huge shout out to [MENTION=14702]CarlosMRRDesignWheels[/MENTION] and the whole MRR company! :clap2::clap2::clap2:

Well we had a good time doing the install. Good luck on track. Nice score on the wheels as well.

Nice! You go with the same 20x10" square?