Vinny@JLTPerformance
Well-Known Member
- Joined
- Jan 8, 2015
- Threads
- 38
- Messages
- 613
- Reaction score
- 264
- Location
- Chesapeake, VA
- Vehicle(s)
- 2015 Mustang GT
- Thread starter
- #1
2016 update: THIS KIT IS CARB APPROVED!
Hey everyone,
We have our 2015 Ecoboost kits ready to go.
The car was an automatic, this was only swapping to our intake, no tuning. We will have a tune package available for the vehicle in the future.
We made a couple baseline pulls on the stock air box to get a solid number to compare against.
We then swapped our intake right on the dyno, and made more pulls.
A tune is not required with our intake! However tuning will greatly benefit Ecoboost owners.
We are looking for another Ecoboost car for testing with a manual Transmission. If you are located in the Virginia, North Carolina and our willing to lend your car for testing let us know! Free parts!
KIT INCLUDES:
•JLT Plastic Intake Tube
•Silicone coupler
•5x8 S&B Powerstack Air Filter (Red or Blue filter) *****DRY FILTERS NOW AVAILABLE (WHITE)****
•Heat Shield with duct
•HD Clamps & all needed hardware
•BOV/Bypass valve cap incase you got with an aftermarket Blow off valve in the future
INTAKE TUBE TO GROW INTO
JLT's 2015 Eco Boost Cold Air Intake is better than ever. Fully computer designed to optimize space and for best fit and finish. Large 5" filter inlet with radiused end for tons of smooth air flow.
Turbo end is 2.25" to meet up with the factory turbo, but then it steps up to 4" with another "barb" in the tube. So when you add a bigger turbo all you have to do is cut the end of the tube and add a larger coupler to fit up to a 4" Turbo inlet!!
Dyno Video here:
http://youtu.be/sV-gYPdXbpc[ame]
Here for more info:
http://jlttruecoldair.com/ZenCart/index.php?main_page=product_info&cPath=445_446_450&products_id=687
Mustang6g forum members get 5% off with discount code : mf6g5%
ADDITIONAL INDEPENTANT DYNO TESTING HERE:
http://www.mustang6g.com/forums/showpost.php?p=439800&postcount=89
Hey everyone,
We have our 2015 Ecoboost kits ready to go.
The car was an automatic, this was only swapping to our intake, no tuning. We will have a tune package available for the vehicle in the future.
We made a couple baseline pulls on the stock air box to get a solid number to compare against.
We then swapped our intake right on the dyno, and made more pulls.
A tune is not required with our intake! However tuning will greatly benefit Ecoboost owners.
We are looking for another Ecoboost car for testing with a manual Transmission. If you are located in the Virginia, North Carolina and our willing to lend your car for testing let us know! Free parts!
KIT INCLUDES:
•JLT Plastic Intake Tube
•Silicone coupler
•5x8 S&B Powerstack Air Filter (Red or Blue filter) *****DRY FILTERS NOW AVAILABLE (WHITE)****
•Heat Shield with duct
•HD Clamps & all needed hardware
•BOV/Bypass valve cap incase you got with an aftermarket Blow off valve in the future
INTAKE TUBE TO GROW INTO
JLT's 2015 Eco Boost Cold Air Intake is better than ever. Fully computer designed to optimize space and for best fit and finish. Large 5" filter inlet with radiused end for tons of smooth air flow.
Turbo end is 2.25" to meet up with the factory turbo, but then it steps up to 4" with another "barb" in the tube. So when you add a bigger turbo all you have to do is cut the end of the tube and add a larger coupler to fit up to a 4" Turbo inlet!!
Dyno Video here:
http://youtu.be/sV-gYPdXbpc[ame]
Here for more info:
http://jlttruecoldair.com/ZenCart/index.php?main_page=product_info&cPath=445_446_450&products_id=687
Mustang6g forum members get 5% off with discount code : mf6g5%
ADDITIONAL INDEPENTANT DYNO TESTING HERE:
http://www.mustang6g.com/forums/showpost.php?p=439800&postcount=89
Sponsored
Last edited:
