Sponsored

20x10 squared setup, widest tire on front end???

blubyu

Well-Known Member
Joined
Apr 29, 2014
Threads
25
Messages
66
Reaction score
2
Location
Crisfield, MD
First Name
Phil
Vehicle(s)
2015 Mustang GT Supercharged
Hey guys, I am thinking of going with a 20x10 on all four corners and 1 inch drop all around. What do you guys think would be widest tire you could fit up a front comfortably? Thanks guys!
Sponsored

 

BmacIL

Enginerd
Joined
Sep 21, 2014
Threads
69
Messages
15,010
Reaction score
8,920
Location
Naperville, IL
Vehicle(s)
2015 Guard GT Base, M/T
Vehicle Showcase
1
What's the offset?
 

trippleyelo

Well-Known Member
Joined
Sep 16, 2017
Threads
9
Messages
504
Reaction score
78
Location
vancouver wa
Vehicle(s)
ford f250 turbo diesel and 2016 mustang svo
What's the offset?
Little off topic mate..

I have BMR handling springs how stiff is the ride
Not installed but in box for better weather?

Did you install camber plates or alignment in good nick after installations..?:cheers:
 
OP
OP

blubyu

Well-Known Member
Joined
Apr 29, 2014
Threads
25
Messages
66
Reaction score
2
Location
Crisfield, MD
First Name
Phil
Vehicle(s)
2015 Mustang GT Supercharged
Offset would be 30mm, I don't have any springs installed yet so can't help you with that. Just trying to figure out how I am going to have to do the front end with 20x10 on all four corners and what size tire.
 

BmacIL

Enginerd
Joined
Sep 21, 2014
Threads
69
Messages
15,010
Reaction score
8,920
Location
Naperville, IL
Vehicle(s)
2015 Guard GT Base, M/T
Vehicle Showcase
1
You could fit up to a 305 on a 10. I would recommend a 285/35 or 295/35 for best fit, however. Your +30 will allow that to clear fine. It will probably poke a little bit though.
 

Sponsored

OP
OP

blubyu

Well-Known Member
Joined
Apr 29, 2014
Threads
25
Messages
66
Reaction score
2
Location
Crisfield, MD
First Name
Phil
Vehicle(s)
2015 Mustang GT Supercharged
Thanks bmac, when you say poke you mean push out towards fender? Thanks man!
 

BmacIL

Enginerd
Joined
Sep 21, 2014
Threads
69
Messages
15,010
Reaction score
8,920
Location
Naperville, IL
Vehicle(s)
2015 Guard GT Base, M/T
Vehicle Showcase
1
Thanks bmac, when you say poke you mean push out towards fender? Thanks man!
Poke means it'll be slightly outside the fender. Not by much, but probably about 3-5 mm. The rear for sure.
 

Paul@PKAUTODESIGN

The Wheel guy
Diamond Sponsor
Joined
Oct 26, 2016
Threads
242
Messages
14,414
Reaction score
2,229
Location
Los Angeles, California
Website
WWW.PKAutoDesign.com
First Name
Paul A.
Vehicle(s)
2016 Shelby GT350 Tech Pack #G5531 Avalanche Grey
Depending on the spec of the wheel

275/35/20 all the way to a 305 tire for the front.
Sponsored

 
 




Top