Saywhen
Well-Known Member
- Joined
- Feb 4, 2017
- Threads
- 64
- Messages
- 829
- Reaction score
- 169
- Location
- Crandall GA
- First Name
- Harley
- Vehicle(s)
- 2017 gt350,2015 f350 lariat,05 Acura rsx,19 gt 10r80 on order
- Thread starter
- #1
Hey guys, I'm getting popping noises again from what I think is the axles. After I changed the stock axles to the DSS 2000hp axles I put about 500 miles on my car and the drivers side started popping. I could make it do it everytime by easing forward,stopping,put in reverse, then easing backards... like clockwork everytime. So, I popped the rear wheels off and checked the torque. The passenger side was fine but the drivers side was loose. I tightened it up to spec and boom problem solved. Fast forward 3 months... the popping is back, I can't make it so it like I could before but it's definitely making noise back there. I'm going to take the wheels off tmrw and check the axle nuts again but damn am I gonna have to do this every 300 miles??? Has anybody else had any problem like this? If the axles are torqued to spec what else could it be? Car has 6500 miles on it and mods in sig. thanks for the help!
Sponsored