zackmd1
Well-Known Member
- Thread starter
- #1
So I am finally creating a build thread to keep all of my mods in order. As some know, performance mods for the 15 V6 are almost not existent aside from a few axlebacks and CAI's. Luckily for us V6 owners most of the major mods like headers and throttle bodies can be carried over from the 11-14 generation. This makes life a little easier on us aside from the minor fabrication some carry over parts require. Below is a list of both my current and planned mods.
Performance
-BBK Shorty headers (Installed 6/16)
-Custom high flow cat quad tip (Planned 2017)
-Custom stainless steel CAI (Installed 2/15 )
-GT Throttle body spacer (Installed 1/17)
-MPT performance tune (Flashed 7/16)
-2014 GT Throttle body (Installed 1/17)
-BMR Motor Mounts .5" Drop (Installed 10/17)
-MMR Lightweight Water Pump Pulley (Installed 10/17)
-3.55 rear end gear swap (Planned 2016-2017)
-Some form of boost! (3.5 ecoboost turbos or custom eaton M90 install) (Planned 2017-early 2018)
Suspension
-GT PP dampers (Installed 9/17)
-GT PP toe links (Installed 9/17)
-GT PP Front Control Arms (Installed 9/17)
-BMR SP080 performance springs (Installed 9/17)
-BMR Cradle lockout (Planned 2017-2018)
-Steeda Billet Shock Mounts (Planned 2017-2018)
-Ford Performance Strut Tower and K Brace (Installing 2017)
Exterior
-Classic pony fender badges (Installed 7/15)
-50th AP grille (Installed 1/15)
-Ford Racing rear taillight panel with OneSmallFry's Cyclone GT350 like badge (Installed 2016)
-Pony projector mirror lights (early 2018)
-GT350 over the top stripes satin black with gloss white accent (Installed 2016)
-Larger foundry wheels 19x9.5 if available or GT CS Wheels (Planned 2017-2018)
-GT Raised Blade Spoiler (Installed 2017)
-Trufiber A72 hood (Planned 2017)
-Carbon Dynamics GT350 style fenders (Planned 2017)
Interior
-Illuminated sill plates (Installed 4/15)
-Illuminated mycolor cup holder (Installed 5/15)
-GT350 steering wheel (Installed!!)
-Custom Shapeways 3D printed toggle switches (Installed!!)
-50th Anniversary Spun Aluminum dash trim (Installed 2017)
-Sync 3 swap (Installed!!)
-GT350 Start Button (Installed 2017)
-Leather Interior (Installed 2016)
-Enabled Premium drive modes (programmed 2017)
-2018 Mustang Digital Gauge Cluster (Planned 2018)
Specific build links for various mods
LT header exhaust: http://www.mustang6g.com/forums/showthread.php?t=25139
Illuminated sill plates: http://www.mustang6g.com/forums/showthread.php?t=20612
Illuminated cup holder: http://www.mustang6g.com/forums/showthread.php?t=22812
Custom toggle switches: http://www.mustang6g.com/forums/showthread.php?t=23868
Custom CAI: http://www.mustang6g.com/forums/showthread.php?t=16618
MyFord Touch Swap: http://www.mustang6g.com/forums/showthread.php?t=31286
Aux gauges: http://www.mustang6g.com/forums/showthread.php?p=943091#post943091
Sound clip (from my catless LT header exhaust attempts)
[ame]
0-60 run, Current Best: 5.3sec
[ame]
Current Exhaust setup: BBK shorty headers, stock cats, muffler delete
Performance
-BBK Shorty headers (Installed 6/16)
-Custom high flow cat quad tip (Planned 2017)
-Custom stainless steel CAI (Installed 2/15 )
-GT Throttle body spacer (Installed 1/17)
-MPT performance tune (Flashed 7/16)
-2014 GT Throttle body (Installed 1/17)
-BMR Motor Mounts .5" Drop (Installed 10/17)
-MMR Lightweight Water Pump Pulley (Installed 10/17)
-3.55 rear end gear swap (Planned 2016-2017)
-Some form of boost! (3.5 ecoboost turbos or custom eaton M90 install) (Planned 2017-early 2018)
Suspension
-GT PP dampers (Installed 9/17)
-GT PP toe links (Installed 9/17)
-GT PP Front Control Arms (Installed 9/17)
-BMR SP080 performance springs (Installed 9/17)
-BMR Cradle lockout (Planned 2017-2018)
-Steeda Billet Shock Mounts (Planned 2017-2018)
-Ford Performance Strut Tower and K Brace (Installing 2017)
Exterior
-Classic pony fender badges (Installed 7/15)
-50th AP grille (Installed 1/15)
-Ford Racing rear taillight panel with OneSmallFry's Cyclone GT350 like badge (Installed 2016)
-Pony projector mirror lights (early 2018)
-GT350 over the top stripes satin black with gloss white accent (Installed 2016)
-Larger foundry wheels 19x9.5 if available or GT CS Wheels (Planned 2017-2018)
-GT Raised Blade Spoiler (Installed 2017)
-Trufiber A72 hood (Planned 2017)
-Carbon Dynamics GT350 style fenders (Planned 2017)
Interior
-Illuminated sill plates (Installed 4/15)
-Illuminated mycolor cup holder (Installed 5/15)
-GT350 steering wheel (Installed!!)
-Custom Shapeways 3D printed toggle switches (Installed!!)
-50th Anniversary Spun Aluminum dash trim (Installed 2017)
-Sync 3 swap (Installed!!)
-GT350 Start Button (Installed 2017)
-Leather Interior (Installed 2016)
-Enabled Premium drive modes (programmed 2017)
-2018 Mustang Digital Gauge Cluster (Planned 2018)
Specific build links for various mods
LT header exhaust: http://www.mustang6g.com/forums/showthread.php?t=25139
Illuminated sill plates: http://www.mustang6g.com/forums/showthread.php?t=20612
Illuminated cup holder: http://www.mustang6g.com/forums/showthread.php?t=22812
Custom toggle switches: http://www.mustang6g.com/forums/showthread.php?t=23868
Custom CAI: http://www.mustang6g.com/forums/showthread.php?t=16618
MyFord Touch Swap: http://www.mustang6g.com/forums/showthread.php?t=31286
Aux gauges: http://www.mustang6g.com/forums/showthread.php?p=943091#post943091
Sound clip (from my catless LT header exhaust attempts)
[ame]
0-60 run, Current Best: 5.3sec
[ame]
Current Exhaust setup: BBK shorty headers, stock cats, muffler delete
Sponsored
Last edited: