Search results

I’m looking for the as built hexadecimal oil sensor as built for a 2015 2.3l EcoBoost non pp package. Any one have it?

I knew the sensor was bad because when I had it in the car and my volt meter on it I was reading about 4v but the voltage doesn’t really matter. When I reved up the car nothing changed an it should have with an increase in oil pressure. I took out the sensor put it on the work bench connected...

Well I’ve been having some problems jheissjr. I wired it up and then tried to get it programmed but my guy is so busy he hasn’t been able to make it over yet. It’s better he didn’t get here yet because I found out that the OEM sensor I bought is defective it’s stuck and won’t move. Frozen. I...

I just texted my program guy yesterday and am waiting for him to get back to me. I’m sitting on pins and needles. lol. I’ll repost when it’s all done.

There are 2 connectors on the PCM. Both are different. AND yes they are in the manual. And no I will not be sending any drawings. This is not a quote but the Russian basically that if I didn’t know how to use the program then maybe I shouldn’t have it. Bye Bye Bud

Disclaimer: I will not be responsible if someone uses the information that I’m about to write about in this thread. I highly recommend that “ NOBODY SHOULD USE THIS INFORMATION” and try to do what I have done. I am using the information that I have found in the 2015 Mustang wiring diagram manual...

You got me the PCM connector drawing I think it’s a C175B. The important thing is all the wire colors match the pin locations I have in my car. Also if you read the verbiage for pins 8,9&20 when you cross reference with the 3 pin oil pressure sensor that’s also in the manual the wording is...

I thank you for the information you gave me. Let me tell you where I am. First the tabs for the cap are inside the connector body. There are 4 of them. Like I said before I spent 5 hours over the weekend and I think of myself as a patient guy. Well when enough is enough I stared prying and...

I have read posts that people have used FORScan and it worked for them. I also have a newer version from most of the other users. So I’ll see. If it doesn’t then I’ll have to figure out something else.

I know that the IPC module needs to be reprogrammed. I have the FORSCAN program on my laptop and I can change any module I want. I might not do it myself as I had a guy reprogram some things to enable the line lock. No parts required. So when I get this thing temporarily wired I’ll probably give...

I know that the IPC module needs to be reprogrammed. I have the FORSCAN program on my laptop and I can change any module I want. I might not do it myself as I had a guy reprogram some things to enable the line lock. No parts required. So when I get this thing temporarily wired I’ll probably give...

Sorry guys but when I made the original post there was a typo. I did say BCM but meant PCM. The edit should show this. I need to get too the connector wire color and pins so I can verify there location and color. You can’t do that with the wires all bundled together and covered up. I’m...

Well from the official Ford 2015. Mustang wiring diagrams on page 151-2 bottom right says C155B powertrain control module (PCM). Need to wire a 3pin oil pressure sensor for the pp gauges I’m Installing.

Hi Form Does anyone know how to remove the top cover on this PCM connector?? I know I can break it but I’d rather not. lol

Thanks for the links. I read them and they are informative but a little vague for me as I’m brand new at this. I was playing around with FORScan to day and for the life of me I couldn’t find the ECM it must be buried somewhere. Just happened to stumble on it the other day but couldn’t unhide it...

Hi Skye Well I’m now at at the programming stage of my pp pack gauge installation. I’m using a FORScan programmer And am in the ECM module I can see where you need to toggle between oil pressure switch and oil pressure sensor. I know it has to be set on sensor but to set this up what buttons do...

Hello I have a 2015 Mustang and need to change the oil pressure switch to an oil pressure sensor to complete the install of pp gauges in my dash. I’m using the FORScan program and am in the ECM module. I can toggle between switch and sensor. It has to be in sensor panel I know that but what do...

Thanks Skye You have done much more than I expected. I cross referenced pages 32,33 and 57. These are the same as the PDF you sent me. Page 57 has the answer I was looking for. It has the single pin oil pressure switch at the top of the schematic and the 3 pin oil pressure sensor at the bottom...

Hello Skye On your reply to my post you have a wiring diagram of a 3 pin oil pressure sensor but it doesn’t show where the wires go to. On the thumbnails on the side it shows that it is on page 32. On the pdf you sent I go to the same page name but page 33 but it only shows a single pin oil...