Search results

You are correct, I found the 2 wire plug tie wrapped to down stream O2 sensor. D&D helped me out today and tomorrow I will wire up the T56 reverse switch to the 2 wire plug and should have sensors and camera. If my SCT programmer works all should be well. But I may have a crank sensor issue, I...

Okay thank you. I will look for the 2 wire Factory connector, but I'm certain it's not there. Only the 3 wire plug was connected to MT82. Did you happen to look at the schematic I sent? Does it make any sense?

I don't want to muddy the waters for that matter, annoy you. I marked up this drawing and sent to the kit supplier to connect the dots. That's when I got a call I was only getting a speedo reading and reverse lockout from this kit.

I only have a 3 wire factory connector, that's it. You mentioned a 2 wire connection for T56 reverse sensor, are you referring on the T56 or a factory plug?

Thank you!! This juicy. Yes T56 is in, I used the BR/GR wire to the ERA provided. No other wires used. (see attached drawing came with kit) For now I need to study your drawings and initiate first. I was on HP Tuners site hard to navigate for me, it looks like it for professionals who know a...

I know this an old post, do you have a wiring schematic? Does your reverse light, camera and sensors work?

Well, I read a lot of your posts re: T56 you and others are at a much higher level than I. You make it sound so simple however I'm old school. I can't work without a wiring schematic. My car is 2017 GT 5.0 ragtop. First off what kind of programmer are you using? I got what came with my...

I'm gonna start reading thanks

Thanks for your reply. You're the only one who says it should work. I've talked with D&D racing, Da Silva Racing, Lethal Performance, LMR, Bowler Performance and all say what I posted no fix. All you get is reverse lockout and speedometer reading. If you could please send me a link to the...

Does anyone know if there's a harness that takes care of Reverse Issues? Bowler says straight up theirs won't fix it. These suppliers say the "cruise control" won't work after you pry it out of them but that's it. I feel betrayed. I'm pissed not one supplier of these Swap Kits mentions these...

Yup

It's pretty easy to get caught without them, the smell alone is a dead give away especially in town a little harder on the highway. Not a good idea to remove them, we would all be dead without them

I'm not super knowledgeable but the intake ports on a 17 are shaped differently to an 18 and the vacuum lines are configured differently. I