Search results

Guys, I bought a full 2.3 Ecoboost stainless system and though well made it turned out to be way too loud for me although rated as suitable for street use. This system has only about 40 miles on it and has never been driven in the wet. Tests done for the benefit of Ecoboost owners in PowerTec...

You just don't want to watch those video's do you. I specify exactly how to overcome the brake fitment problem. Please don't argue for the sake of it. DV

xxanchormonxx, David Vizard here. I have modified my 2023 Mustang Ecoboost's engine to the point where it is just shy of 400 RWHP. I will be doing track days at VIR and I am looking to deal with the aerodynamics. Underhood temps with the stock bodywork indicate that there is lift being...

would help him with his question about fitting 18" wheels over the massive brakes on his GT350? Other than telling Nate 22 precisely how to do it I suppose it has no relevance!!! I don't think you have watched either video! DV

I am a road racer! Drove professionally for several seasons for Chrysler UK as well as being their chief consultant. Also drove for Mountune racing for a season in Cosworth Sierra's. Have set track records on all but one of UK major rad courses all with engines that I developed and built. A drag...

If you want to lower your musang by 1 inch, save about $700 bucks on lightweight wheels that can be up to 2 inches wider than stock and install a street tire that will , in combination with the wheels, cut about six tenths of the 1/8 mile (about 9 tenths of 1/4 mile) then read the track tested...

Nate, I have about four, maybe five video's on youtube that tell a lot more than what you are calling for here. Just put PowerTec 10 into the YouTube search bar and sort through the 15 or so Ecoboost Mustang videos. I show, in one of the videos how to drop 4 tenths off the 1/8 (6 tenths of the...

Hi, David Vizard here. I am responding to APEX wheels response to my post which went thus:- Apex wheels cost me about $6000 (six thousand$) and still no wheels. Will not deal with them ever again! Let me make it clear now (maybe should have done so at the time of this post) that the $6000 I...

Apex wheels cost me about $6000 (six thousand$) and still no wheels. Will not deal with them ever again!

first point- you must not have looked hard enough! The air temp at the turbo does affect output but you are right, it is very minimal until the temperatures are really much lower. When I was a consultant for Mountune racing in Europe we found that when the intercooler was really inadequate...

You are not telling me anything I do not know and practice religiously. I test on the flow bench. the dyno and the track as well as buy equipment for test that does not fall into the scope of the above. Please do you homework before responding. DV

Your opening line! Why don't you ever show the proof to your claims ? What the hell are you talking about!!!! Check your facts on tests as you are so far off the mark it's almost unbelievable!!!! DV

I don't know if helping you guys concerning the true functionality of your cold air boxes is going to get me a lot of flack so I will be less obvious here and tell you my YouTube channel has a 4 part series on PowerTec 10 testing the effectiveness of such. Which is best? The one I show you how...

Where did you source this tire lettering deal??? David Vizard

BD the videos are located in various sections such as head, cams & valve trains etc. There are about 14 sections all told, and they should be easy to find on YouTube. Cheers DV

Thanks for the support here amidst a lot of not so friendly posts. If you would care to do a little research as too just how many I might be posting for then, if it's worthwhile, I will consider doing a one month advanced notice exclusively for Mustang6G subscribers. Cheers DV

K4fxd, Thank you for such a civilized reply. I strongly suspect that you have a lot more dignity than some of those folks finding nothing but wrong here. And by the way there is nothing wrong with reading. In fact the opposite is so here. Got any titles you could recommend as I almost...

Thanks, here we go. Mr. K4fxd, I will as you put it, now Critique away. First let me say I mean no disrespect here but what I have to say will cast doubt on your ability to service others as to the worth of what may be presented to Motortec Features channels. 1) I tried to watch it, sorry...

Dear forum managers, On at least two occasions I have asked for someone to get in touch with my (email will do fine) on how my channel (MotorTec Features) which has way more subscribers than this forum can best help promote this Mustang forum. The only response I get is a form telling me how to...

Mr, K4fxd, Totally agree with your comment regarding the fact that those who are not novices do not want to sit through basics to get to the meat of the matter. Here you are saying it would be better to tell where the serious stuff begins. Am I right? BTW is it OK if I critique your comments...