Search results

Appreciate the invite but I’m in Missouri now. Looks like I need to update my profile. 😂

Audio control just added a few little “extras” with a recent firmware update. They added in all-pass filter enabling. Is that something we are already doing with Forscan? Or is this something that should be enabled for a better signal? Just curious if any of you have dealt with all-pass filters...

Using signal sensing. Audiocontrols seem to handle this pretty well but it may become an issue will have to grab that wire from the camera (I think that was the one) I may have to pick up some of the RCA adapters you linked and maybe run the cat6 cable with adapters you talked about in the...

Speaker level inputs.

I have the 9 speaker system. Used the FO3 connector and bypassed the amp. Audio control d-5-1300 run to focal 3 way speakers in the front on a passive crossover. With the JL sub. Lots of volume at the max volume. Set the timing loosely and slopes at 12db. The part I was a little concerned with...

That’s the one I went with and you were right! Awesome sub and loads of bass. Can you tell me or point me to a post that explains the change to variable line level with Forscan. I did the flat EQ change only. With my setup I’m just kind of wondering if I change the ACM setting will I still have...

Did you end up using the JL 10” or 12” was looking at both but of course Crutchfield says the one that fits is the 10”. Replacing a budget 12” kicker

That makes sense I would just eliminate the rear channel and let the focals perform like they should. I kind of got talked into using the rears with the install even though they are still stock. You guys have amazing sound quality with just the front stage only? I know with the way they are set...

Meant to say Focal crossovers

They used the Focal tweeters which I was hesitant to use in the first place just because the amp is capable of doing all the crossing over and adjustments. While investigating I saw new wires coming from the crossovers going to the “tweeters” and pulled down the A-pillars and the connectors I...

I have the Non B&O, 9 speaker system. Did a little exploring and saw how this “installer” used taps to feed back into the factory wiring for the tweeters. I brought it to his boss at their other shop and he was the one telling me I needed the RF DSR-1 or he needed to tap into the factory amp...

Looking for a little assistance. Have an AC D-5.1300 and running Focal 3-way in the front. Had the FO-3 harness “installed” and sounds worse than when I brought it to them on the stock amp. Was told today that there isn’t enough voltage from the head unit and he wants to run it to the stock amp...