Search results

I know its an older thread but I have to give a huge thumbs down to the RokBlokz splash guards, the rears are fine no problems but the front is a poor design, the two bottom screws are alright but the top screw attached with a plastic clip type piece that is supposed to grip the lip of the...

I used the Ford Standard setting. It will have Ford specific programming that the OBDII Standard would not have. I currently have Ambient Air Density and Boost Air Density for two of the settings. Interesting how the Ambient Air Density will change with the weather. The Boost Air Density will...

I also have the Roush closed lid cold air intake. My Mustang is a 2.3 High Performance Package so it has the active exhaust, when you get on it there is noise, I don't listen for intake noise but over all the Roush intake is quite when just driving along. I also have the dual port blow off...

You are not correct on this, you can over fill an A/C system using the store bought cans. The cans are under pressure and the can is connected to the suction side of the A/C. The can nor the system knows how much refrigerant is in the system so there is not automatic cutoff built into the...

So your tuner is ignoring you now, that does not sound good to me. Have you contacted the tuner by phone? Don't mess around with email because that lets them ignore you. You have a real issue and the tuner should be assisting you. If this tuner has turned their back on you please name the...

I have a Roush closed cold air intake on my 2021 2.3 High Performance Package and it does not make a lot of noise, the only time you hear it is on a cold start up for about the first minute then it quiets down. You don't hear a rush of air noise other wise. I also have a Turbosmart EM Kompact...

I just installed the Banks Power iDash Super Gauge along with the Autometer A Pillar single gauge pod in my 2021 Mustang 2.3 High Performance Package. The Banks Power iDash Super Gauge puts a lot of information at your fingertips, you can show up to 8 items at once on the gauge and you can...

Look up this shifter on CJ Pony, they have install video, it is not hard to do. It is harder to explain it than it is to install it. The video is good and will show you how easy it is to instal.

The shifter when you first install it the button might be sticky but once you start using it the button frees up and is not an issue, there are no rattles from the shifter. I used the button and shifted the shifter about 50 times and it freed it up nicely.

Here are a couple of engine covers.

Sorry if I did not reply, this sign came from Hobby Lobby.

I tried to submit a review of the new MPT version of Liquid Glass and they refuse to post the review, I stated the difference in color and consistency as well as how the new Liquid Glass is like water it is so thin. It clearly is not the original Liquid Glass that MPT is selling. I also...

I use Pro Elite from AutoZone in the 24 pack, they come out to a dollar each but they are a good quality microfiber towel. AutoZone used to sell microfiber towels under the AutoZone name that were super good quality but then they started carrying the Pro Elite in place of them. Don't buy the 100...

There is one more difference with the MPT Liquid Glass and that is the original Liquid Glass has a part number LG100 while the MPT Liquid Glass has a Part Number LG900, I think that accounts for the different formula more than the different container.

One more thing it was mentioned that maybe the bottle of MPT Liquid Glass needed to be shaken up to mix it, I did shake the living you know what out of it and it remained like water so I poured out $36 dollars worth of MPT Liquid Glass just to be sure it had not formed a solid at the bottom of...

OK, I said I would purchase a can of the Liquid Glass with the photo of the newer Corvette on the can so here is a comparison of the MPT Liquid Glass from the black plastic bottle, the original Liquid Glass from the can and the Advanced Auto Parts Liquid Glass with the newer Corvette on the can...

I put a coat of the MPT version of Liquid Glass on my John Deere tractor hood and used some of the Liquid Glass from the can on the right side in the photos on the body behind the the hood and the Liquid Glass from the can wiped off very easy with no roughness to it. The MPT version of Liquid...

I received the MPT Liquid Glass in the bottle and it is not the original Liquid Glass, it is very runny and when you apply it after it dries it does not come off as easy as the original Liquid Glass did. The photo of the Corvette on the MPT bottle while appears to be the same car it is taken...

Purchased a 2021 left over Mustang 2.3L High Performance Package 10 speed automatic brand new on March 30, 2022. List of mods completed since purchase: 1. Liquid Glass Polish to protect paint. (3 coats so far) 2. Install Weather Tech Floor Liners driver & passenger side. 3. Install 3M Ceramic...

Nothing wrong with people changing out the shifter levers on their cars, be it an ecoboost, V-6 or a GT, the stock shifter lever is not much to look at in any of the models. Personalizing your vehicle is not a bad thing. You know there was a time when a four cylinder offenhauser won the...