Search results

There's also a way to adjust the window lean with the door panel off. I believe it was a bolt at the bottom that adjusts the tilt of the window rails. I adjusted mine to lean in a bit more so the window acts as a spring and lets the door pop open a bit nicer than when I first got it. It could be...

I had similar symptoms when my throttle body connector was left disconnected.

That is interesting, I would love to hear about how far you get. I would be interested in a 91 octane tune if you are tuning anyone else? I have 1050x, a dw400, upgraded wire, JMS BAP and a truck manifold. I wanted dual fuel system, but really like being able to pass smog with an afternoons...

Are people not doing this? It was one of the first things I did, even before installing my BAP. The wire upgrade was super common and recommended by companies in the 3 valve days. Kenne Bell had it in their install instructions for their 3v blowers It might be a placebo but it felt like the...

I am in cali with a paxton kit and a few different intake manifolds and other stuff. I just swap all the paxton injectors and parts back on when I need to pass smog since it was a smog legal kit originally.

So is there any reason not to have only filters on the valve covers? I know they will get dirty and I'll have to replace them eventually. I haven't had any problems yet, but I am not sure if that's bad or dangerous

I have sync 3 in my 2015 and my CD player works fine as expected. Where did you purchase the new system from? I bought mine on Amazon and had to give the seller my VIN in a private message to make everything work, so I know its possible

I'm trying to put a Gen3 f150 manifold on my centri car, but I'm pretty sure a piece is missing on the back for an imrc connector Does anyone know what the part is called, or have a part number? I want to keep the imrc system if the part is cheap, but I'm not above locking them out if it's...

What are people usually displaying with these? I usually have knockr, cat temp and lambda on the screen. Is there anything else I should monitor?

I was under my car again this weekend and there's nothing to put those pins back in once the belly pan is out. They hang free otherwise

Throttle body on correctly? I had a slight leak and taking off the throttle body and putting it back on fixed it

I wouldn't drive it around without it. Or if you do, then make sure you zip tie the wheel well splash guards

So it comes with a different MAF sensor? Is that as tunable as the normal one by aftermarket tuners? If he ends up adding or changing parts in the future, why not just decide on a tuner now and get a normal air intake. That way he can tune for the gen3 manifold also and a intake

Everybody here is wrong. If you just take it off without doing anything else, it is very unsafe Yours fell off, or you are taking it off? So the thing with that splash guard is that it has 2 holes on each side to hold your wheel well splash guards in place. When you are parked and underneath...

I have full coverage usaa insurance and was told they cover it. When my last mustang was totaled of course they didn't cover any of my aftermarket parts at all. I had receipts for the supercharger, rims, all kinds of stuff and they still offered the same amount as before saying things like the...

You should get the tool to open the gas tank. I saw videos where guys did it with a screwdriver and a hammer but I couldn't get it to work for the life of me That tool took line 2 seconds though to get it off and back on

I put a DW400 in my car and it worked just fine. You will have to chop up the clips that hold the stock pump in place though since the DW400 is larger. I happen to have a boost a pump, and the wiring upgrade with the relay, but I am pretty sure you don't need it at all. All of the install...

Do you know who it is? Also do you know if that chart has the IMRC lockouts installed for the hp and tq? I have a truck mani in my garage, does anyone know if lund would do it, or what other tuner would be best to use with it? I have a lund ngauge and a sct x4 from vortech. Not sure if I...

Damn that truck mani looks fun! I vote on an 18 manifold. Mine was basically free and the gen 3 truck manifold I have was actually free on craigslist. I locked mine out with zip ties so that was also free. I'd personally get a tune with any of the manifold swaps, so I wouldn't even count that

The fuel pump on my high milage 2015 was on it's way out and those come with fuel filters. You don't have a normal filter to replace, but if you wanted to you could swap the fuel pump. DW400 is less than 300 bucks