I was in the same situation because of the liars at https://www.blueovalindustries.com/lg0100.html. Even if you break off the two extremely long mounting arms, somehow screw it, you'd need to use some caulking to hold it in so it won't flop. I almost did it but went out and bought the correct...
"Deep into that darkness peering, long I stood there wondering, fearing,
Doubting, dreaming dreams no mortal ever dared to dream before;
But the silence was unbroken, and the stillness gave no token,
And the only word there spoken was the whispered word, “Lenore?”
This I whispered, and...
When I bought my downpipe, I made sure to get the Snapon A140 socket for the turbo studs along with a new set of studs just in case anything happens.
VIM used to make a socket for this.
Yesterday I finally got the front and rear BMR sway bars on. The front passenger end link hissed when it was removed and squirted out water. Going over a speed bump yesterday, I could what I believe to be the end link making a noise. Both bars are set on the middle setting.
Just double checking...
I have never had a car tuned. I was going over the Tune Plus procedure for my A10 https://cdn.shopify.com/s/files/1/1027/5211/files/Datalog_Instructions_-_Ecoboost_Mustang.pdf?v=1602770177
I have 255/40R19 tires, which should be 27” high
The 10R80 transmission’s 5th gear is 1.52 ratio
I have...
The A10 transmission is really just a 7 speed transmission with "gears" 8, 9 and 10 being overdrive. To get any meaningful action, make sure you're in 7th gear or under.
Basically Ford will identify anything non-oem as being catastrophic. If you read this actual Ford doc, it will detail how all mods cause issues. Here's the downpipe section:
Other highlights from the doc, including how any non-oem exahust will break the engine and/or turbo:
For me the big change was filling up the tank to around 15.25 gallons. Before I'd fill up and it would be in the low 14's. But in hindsight, DTE, MPG and the fuel gauge are all linked. And yes, the fuel warning lights would come on at a more reasonable reading.
EB fuel tanks are 15.5 gallons...
Not sure why no is talking about this but I adjusted my AFE bias to 1025 for my EB to stop getting premature alerts. I'm about a quarter of a gallon away from being right with the 25 mile warning.
If you look around their site, they take pride in their custom wiring harnesses. It was totally needed for the 15-17 MY. I do wonder if they jumped the gun and assumed that hadn't changed with the 18+
You have the part numbers right there. JR3 means model year 2018 Mustang...
I have this and you can use it to tap into the running lights without cutting the factory wires
https://www.starkey-products.com/mustang-hood-mounted-turn-signals-kit-2018-2019-2020
They also have this but it doesn't have the end connectors like the turn signal kit has...
In the GT500 you can just hold both paddles and rev. I really wish that was an option on the 10R80.
As someone who accidentally shifted to neutral at 60mph, don’t. The A10 takes longer than other tranny to get into gear. I couldn’t get a throttle response for what felt like three seconds.
Here I am loading 2x4's from Home Depot into my Mustang during a polar vortex. I went for the 92" length just in case i couldn't pull off the 96" but turns out, I had nothing to worry about.
Here's a winter storm pic from Wisconsin. I could barely tell my headlights were on from the ice...
I did my driver side last year. I used a torque wrench from the Autozone loan program. For weeks I just kept my hands firmly on the wheel and did my best to feel the road. Foot off gas, feel. Accelerate, see how it feels.
There is a bitch to remove cap on these wheels. Check it...
I don’t know about the older S550s but since you have a V6 you’re probably missing stuff. This kit includes the fog light switch plus wiring. https://www.starkey-products.com/mustang-fog-light-wiring-switch-kit-v6-S550-2015
Just incase anyone actually wants to know the wire gauge sizes for the C311 connector^, you can find the pdf here https://www.mustang6g.com/forums/threads/side-mirrors-upgrade-mustang-v6-base.150095/post-3068779
I have a basic set of 2018 black US power mirrors (no heat, no indicators, no puddle light) that I would trade for a Euro Mustang's power fold back mirror relay. If someone is interested in an international parts swap.
The mirrors do fold back with manual effort. I'm not sure how...