Search results

I don’t know. Please contact SCT.

What’s your zip code?

Yes

Reduced. $139. It's unmarried and unlocked.

Keep in mind that the driver door lock button wires 1, 2 and 4 will need to be reorder (pin 3 remains the same) from this: to this:

After adding the wires to C340, connect them according to the wiring diagram posted by NC GTier a few posts above

C210 is a 20-pin black connector by driver side kick panel

It's definitively doable without replacing the door harness. You will need a DDM (preferably a used one so you don't get the PMI error), a new door lock with the three memory buttons, the appropriate door trim piece to accommodate the bigger door lock with the memory buttons and add the needed...

Anybody?

New price. $159 OBO

For sale is my SCT Tuner, It's unmarried and unlocked so you can use it to tune your car. $199 OBO.

By the way, all the sensors are the same so it doesn't matter which one you decide to use for each location as long as you turn them in the correct direction when installed and keep the polarity pins the same. If you switch the polarity, you'll get an 'internal sensor failure' on forscan and if...

When drilling the holes, don't put pressure on your drill and use a variable speed drill. Use the lowest speed. The plastic of the bumper is very soft, so the drill bit will have no problem cutting a hole. As you know, you can always make the hole bigger but it's very hard to make it smaller if...

My OEM sensors were 17mm in diameter including the rubber ring around them but since the hole needs to be exact for obvious reasons, I used a STEPLESS drill bit from Harbor Freight (SKU 66463) which allowed me to drill the hole (the location is already marked on the bumper) to the exact...

Another successful installation, Thank you 'already' and 'sergejbubko' for your write up and advice. Just a few notes to add more detail. OEM wire color Function Pin # at the rear bumper connector (C405) Pin # at sensor Color I used at sensor Pin # at the BCM connector (C2280D)...

yes, it is

yes it is available. I’m in west palm beach

Roush supercharger for 2015-2017 Mustang. Easy to install at home. Here is what’s included in this kit; - Roush/Ford Racing R2300 2.3L TVS Supercharger - Upgraded 82mm Supercharger Pulley. Yes 82 for more boost. - Air-to-Water Intercooler System - Full-Face Low Temperature Heat Exchanger with...

These are not the 50 LE wheels. They look similar, but not the same. You can tell this is the 50 anniversary package, not an LE. (Easily recognized by the rear windows not being in sections)

Are these still up for sale. I didn’t see them on eBay