Search results

Replace the o-ring and you should be good to go, but if you're going to swap it go on TascaParts.com and then enter the OEM part no. into Google to find an aftermarket solution. The MAP sensor is a tight fit by design.

Yes sir, good to go with the Street if you don't want to push it! Feel free to use WEBCHAT5 to get our largest active discount, which includes no taxes added (we eat the cost) adn free shipping to the lower 48!

Factory ones will work, but they're a tight fit. They will stretch over the larger inlet/outlet of the Race (.25" larger). It's just MUCH easier to get the larger couplers that come with the pipe kit and slip them right on. If you purchase the intercooler (Race) and pipe kit separately and need...

As an FYI - the condenser issue has been resolved as we've upgraded the accessories and top mounts to place it further away from the AC. The issue hasn't occurred for some time.

FB groups will get you traction.

Hey guys - just a head's up that our best sale of the year is active! 10% off plus no taxes added (we eat the cost) and free shipping to the lower 48 on any CVF-branded products. Feel free to give me a shout via PM if you have any questions as well!

If you've got a boost leak it's more than likely from the piping connections that there - that's a place we've never had a problem reported from and the intercooler's one our our best sellers. Spray hot soapy water on the 4 pipe connections (use dish soap if you have it around) and go for a...

With clamps it's a tough question, but I'd lean towards no (to be safe). It looks like the Flowmaster is cut and slip as is our y-pipe, so you're going to have to cut and slip there as well. Welds depend on the market around you, so I'd call an exhaust shop and ask. If you show them both parts...

As a note for folks we're aware of the issue with the Race intercooler and addressing with a slight redesign. Will be no more rubbing issues (which were few and far between, but happening to be frank).

No worries at all! The TB Spacer situation definitely makes sense - that we have heard about! Appreciate you clarifying!

We appreciate that input! That’s not something we’ve heard of before (particularly with the Street) but we’ll certainly add that to our engineering notes. When the pipe kits were released a few years back (intercooler has been out for about 3 years) the hose length became a question on newer...

All 3 are going to be similar in terms of installation as they're stock replacement - OEM piping will fit all 3. Our Street is easily the best bang for your buck in terms of value and data on the product page confirms effectiveness - if I can answer any questions feel free to PM me...

OEM is 2.5", Race IC is 2.75"

The couplers you're seeing on our web site are for the charge pipe kits we offer as the inlet/outlet on the Race IC is .25" larger for performance-related reasons. The Charge Pipe Kit comes with smaller silicone couplers for OEM fitment, so we offer the larger ones for Race IC fitment (seamless...

Happy to help and thank you for the kind words!

The bumper is going to need to come off, unfortunately.

The Race will fit with the stock crash bar, yes. You want to measure IAT2 with the Cobb AP, not IAT. IAT is up top and IAT2 is post-intercooler. Feel free to give me a shout over PM if you've got any other questions!

If you're going stock location give us a look while you comparison shop. There are plenty of reviews on the site (and via a Google search) but the product page link below has actual data proving the effectiveness of our unit at a comparable price to the AM one...

No worries - it's what we're here for! Sorry for the delay as I was out of commission yesterday. Option 2 is your best bet. In regards to option 3, the only option I've seen that's 3" from y-pipe down is something like the MBRP cat back that comes with a 3" y-pipe but uses the reducer between...

The y-pipe is 2.5" and connects from the downpipe via a 2.25" band clamp (that is under the car now). Our downpipe is 3" but connects to the y-pipe via the same sized reducer adapter on the other side (3" to 2.25 adapter). Since this post we have introduced a 3" to 3" adapter, but you would...