Search results

It's been holding up pretty well. It's a pain to keep clean because of the insane amount of brake dust that the PP leave.

MRR M600 19x10 and 19x11 with 285/35/19 and 305/35/19 nitto g2's

Stock pp wheels are in storage. It's a shame I couldn't use the michelin's they came with stock

Here's a picture with the car just recently washed and a different angle

Not sure yet on the longevity of the finish since it's only been a day.

Plasti-dipped my MRR M600 19" wheels this weekend. Liked how they turned out. Might eventually get them powder coated. MRR should offer a silver color standard for these wheels. Before After

Update. I bought and installed a line driver. Signal was just too low although I don't have a way to test it. I can turn up on channel (right) almost all the way on the line driver but the left channel only like a 1/8 of the way before I get insane distortion. Either way it isn't perfect but I'm...

So after further testing, I found that there's a roll off at around 40hz. When using a 20-30hz test tone it's barely audible with everything turned all the way up. I hooked up a audiocontrol epicenter to try and control the roll off but either the epicenter is bad or the signal is just too low...

This did not work. I'm getting no bass to the sub. It's on but the it's really low and the sound is weird. I thought this was going to be easy. :headbonk:

So I looked up this in ForScan. For ACM 727-01-02 0300 34 is what is showing up. So if I change it to ACM 727-01-02 0000 34 and click write this should disable eq and processing from the ACM? Just want to make sure before I screw something up. Thanks.

2018 401a with shaker pro. So I made the harness to tap into the rca output at the dsp/amp. Replaced front speakers and added an amp. Worked perfectly. With the spare rca outputs (rear l/r) I'm trying to add the subwoofer amp. Unfortunately, it seems as though this signal is filtering out 200hz...