Search results

Thanks, DukeGaGa! I saw that in your earlier post but was reticent to attempt it since my autoinstall.lst looks like Lost's in #4577. I decided to give it a shot - and it worked great. It's now up to date on owner.ford

If you use a Mac to download, unzip, and copy, you should pay attention to the results. I used the same thumb drive that I used to update to the [unofficial] 3.0, but this time I got a LST_ERR05. I was so focused on the autoinstall.lst discussion here that I didn't pay attention to the files...

Interesting! I was following the directions on another forum and it said the previous build is required. http://www.focusrs.org/forum/30-focus-rs-electronics/92154-unofficial-new-sync-3-v3-0-build-17276-nov-07-2017-update-13.html Thanks for the correction.

Just to be sure, the 18025 is an update/patch for 3.0 Build 17276. You need to have that installed first.

It's funny, I think you are the first to mention this. All the sites I read no one questioned why you needed to have the engine running. I figured it had to do with the fact that the accessory mode draws a lot of power and if the voltage drops below a certain level it can wreak havoc with the...

Which one did you get? I bought these $22 crimpers on Amazon: https://www.amazon.com/XH2-54mm-XH3-96mm-Terminals-SN-01BM-（0-08-0-5mm2）/dp/B00YGLKBSK/ref=pd_ybh_a_38?_encoding=UTF8&psc=1&refRID=ZA1MJ75XEREVQENPP205 It did a fine job crimping, but did not square the crimp. The fit of the...

That's the same one the link on page 1 sends you to. I got it and it's worked fine from the start. FWIW, I mounted mine with the cable at 6 o'clock, so I guess it doesn't matter.

OOOPS. Sorry, that was in response to Sherrodmustang.

Considering the wires you spliced for the GPS - are you sure you spliced into one of the gray wires and not the black/gray one? I started to do that because the gray wires looked white in the light I was using, and second, it was tired and I was getting late.... I'm glad I stopped to re-read...

An afterthought on Steps 6 and 7 While I followed the instructions as written, I got to thinking afterward if splicing and soldering the 4 wires is the only way to do it. Is there a reason why a male terminal (such as Tyco 571-1924-968-1) can’t be used instead of splicing, soldering, and...

Good grief. Thanks Stang1971. It was quite the aha! moment when I read your reply. All is now good. I totally forgot about unplugging that. BTW, I graduated HS in '71.... The mind is a terrible thing to lose!

From Head-scratching to Head-banging I have everything installed and working - CarPlay, Sirius. EXCEPT - I'm getting a "No Key Detected" message when I push the Start button. I cannot start the car nor activate the Accessories mode. Which means I can't use the OBDLink MX and Forscan to...

Thanks for offering to help HextallS550, but I'm not using Travelink either, since I don't have nav. FYI, The directions never mentioned Travelink, only Sirius ("If you are adding Sirius you will also need Tyco 2035334-1"). So, to be clear, if I want just the basic Sirius function I don't need...

Head Scratcher... So, I'm in the process of doing the wiring, per page 1. I ordered my terminals from Mouser via the provided links. I attached the two 1924968-1 terminals to the wires for 6 and 19 on the ACM but something's not right. The 24 pin ACM connector seems to have the same female...

I bought the screen, APIM, control unit (bezel), and the ACM w/ sat as a bundle deal from a totaled 17 Mustang EB Prem with Sync 3. I have a base 17 EB. Never thought about taking the wiring at the time. I called the local yard where I got it from and they’re good with me coming back and...

I did get a connector on ebay for $39. As for the screen, I followed and endorse HextallS550's advise to not buy anything without seeing a picture of it first.

HextallS550, first, thanks for the great work and time you've invested in this project; I wouldn't have attempted doing this without this thread. Question: You advised him: "don't buy them [apim and screen] separately". Is there a reason other than the chance of buying a MFT screen, from not...