Search results

Sorry. I did not know that you wanted open-circuit voltage measured. I measured 5.54 volts just now. Therefore, I believe that your measurement of 5.6 volts is nominal and normal.

I made an unsuccessful try. I chose not to puncture the wire insultation or the contact environmental seal so I could not measure the voltage on that wire. My installation (2017 EB) does not have any access to contacts in the location of your red arrow. If you have a suggestion, I can try again.

The attached image is from several years ago on mustang6g. It's what I successfully worked from. I did manage to find a nylon washer of the appropriate size at a local hardware store. I don't think that the fob needs to be disassembled this far. I believe that the panic key will just pop out and...

Request discount code. Thanks.

Have a look at this thread. You may want to try something there. http://www.mustang6g.com/forums/showthread.php?t=22357&highlight=key+fob

There is no secret. Let me try again and speak more in detail. Please look at the picture in the post that I linked. It is explained there ... and here. The part on the left is the bracket that goes on the passenger side of the hood. On the ball side of the bracket, I (me, myself) used a Dremel...

I would like to share with you a solution that I used when I encountered the same set of circumstances that you have. After receiving the spare parts from RedlineTuning, my installation has been operating just perfectly. The mod I made is shown in the image which is part of the post below...

Here are my thoughts on what I have found. I first got the Helm, Inc one. It is by Ford, sold to Helm and on a semi-protected CD to the customer. It seems overly difficult to navigate and quite hard to look up anything (you have to guess which section). It's the same technology and format as was...

Redline Tuning proves their integrity again. Redline Tuning comes thru again! Reference post #74. I emailed with Andreas of RLT several times. He agreed that my modification to the bracket was not the cause of my issue. He rapidly decided to send me more replacement parts than I expected ...

PM sent

Redline Tuning???? EDIT: Connecting directly with Redline Tuning produced wonderful results. Andreas quickly agreed to send me some replacement parts. They arrived quickly and the system now works ever so smoothly. Reference post #85 [My next job is to have a discussion with reseller.] I...

Thanks. My installer used SunTek. It is installed on all the front, 18 inches up the hood and the side mirrors. I have used same film on several other cars with good results.

Still undecided on that. I need to see how well I like a stock EB first. If I head that direction, I plan Cobb AP to start, perhaps followed by an Adam Tune+.

This is my second, yellow, Mustang, convertible. My first was a 2005 GT. Feeling that I didn't need a 5.0, etc ... I happily own an EB. I was preconditioned by my prior car, a German turbo 4. Still working to achieve the first 1000 miles, I have restricted mods to useful, comfort things: dealer...

To share experience ... after owning my car less than 24 hours, I went back to Service with an illuminated air bag light. First determination was they had to R&R the passenger side pretensioner. That did not fix the problem. Consultation with Ford and digging revealed that a wire harness was...