I've got a '15 with a Gen 3 Whipple and a JLT catch can. In somewhere between 2-3k the car has used a quart of oil. Still need to check the catch can.
In runs great and doesnt smoke so I'm not paniced yet. I'm curious if this is inline with the norm?
I'm running a Whipple Gen3, Lund tune and relocated sensor. I am a little unclear if the IAT2 reading on my nguage is actually post blower. Can someone please confirm what IAT1 and IAT2 are actually telling me with this setup?
My car us a 15' vert, manual, Gen3 Whipple, 3.5 pulley, 95lbs injectors, BAP, Cat deletes, 3.31 gears, and 305/35/20 tires. I've got a 93 tune, and a 100 octane tune loaded up.
My issue is the that the taller tires make my effective gear ratio 3.18 and the car is heavy! I'd like a little more...
Had a set of Mak cat deletes installed last fall. We used V band clamps so I can switch the cats back and forth as needed. On the day of the job we got the cat deletes on and ran out of time. Before I got back to have the job finished, my old cats, extra flanges, and V band clamps were...
https://www.bmrsuspension.com/?page=products&productid=1927&superpro=0
It's $100, saves about 10lbs off the front of the car, and is an easy install.
But will it increase airflow to the intercooler?
I hate that the big bar blocks so much of the cooler, but then I realize that the bumper...
Just before I put my car away for the season my Ngauge starting acting a little funky. It wouldn't wake up when I started the car. If I unplugged the OBD it would wake up then shut off within a few seconds. I seem to remember hearing of a similar issue but I cant find anything on it...
I want to test my coolant before the winter....when I did the radiator and supercharger I just kind of eyeballed a 30/70 mixture.
My question is this:
Is the over flow active meaning coolant cycles through or is the coolant in there whatever I dumped in last?
Other than testing via the...
Follow along with the pictures here:
Here is my car
Here Nitrous Expresses signature
Here is their profile
That's my car in my driveway! I am obviously not looking for royalties, but its strange right?
Getting my parts list together for my clutch upgrade and thinking of doing a shifter while the trans is out. With an aftermarket low profile knob I actually don't hate the shifter for my driving style but I figure while its apart......
What I don't want is any increase in NVH.....0 noise or...
I've got a 93 and 100 cal for my Whippled 2015. I looooooove driving the 100 cal, the car is just so much crisper.
It takes 1/3 bottle of Boostane pro to make 12 gallons(12 is about my average fill up) of 93 into 100. For as much as I drive that's not going to break the bank.
They say the...
Kind of a newb this to ask and have happen, but I had do a roadside fix on my new custom shift knob with super glue. Got me through the weekend but I didn't consider that I'll be needed to do a clutch soon.
Looks like there might be a chance I can remove the shifter from the trans and...
Got my SVE550 steering wheel(which I am not in love with) on about a month ago and wanted to tie in the red stitching. I originally was going to do the shift boot, ebrake boot, and console lid but decided to start with the shift boot. Got the Nappa leather and love the quality!
One thing to...
Working on a 1996 Cobra with a single 76 turbo. The car was cheap but it's cobbled together. It does go good tho! Previous owner put a CPU out of a 1996 GT because he was running an auto. The car now has a Lenco converter-less.
The tune is rough and every check engine light is on in the...
On my Whippled 2015 I recently installed a UPR catch can system, Mak Cat deletes, and attempted to adjust TPS but couldn't. Did succeed in marring up the magnet a bit....
Around the same time I've started to hear a clicking sound from the drivers side engine compartment at start up and my idle...
Since you guys have arguably installed and reviewed more exhaust systems than anyone. I am curious if you've ever tested them with a decibel meter?
I am personally looking for the quietest performance muffler for these cars.
Installed 3" connect Mak cat delete over the weekend, along with Magnaflow resonators. I already had MBRP street factory connect, so we cut the 2.5 section out making this a true 3" system from the header back.
We used Vband clamps so we can reinstalled the Cats easily for emissions. The pic...
Gauging interest in a Central CT coffee and cruise event for the weekend of 7-14. Trying to see if we can get a handful of cars at least.
Still in idea stage but I am thinking meet somewhere for coffee then cruise to a performance shop or park.
Post up if your interested and we can...