Search results

I currently have aftermarket components (Crutchfield Sound Ordnance P67CB). The tweeters are extremely harsh, and I think it's because of how I had to install them in the A-Pillars. I used very thin butyl rubber rope which came with them to "weld" the surface mount cup (with tweeter installed)...

If you have been following any of my threads, I probably sound like a broken record, but I swear there is something wrong with the door audio design in the S550. I have the base system on a 2016 Mustang v6, originally with the 4" screen. I always thought the stock system was way too harsh in the...

I am slowly building a system in my 2016 v6 with the base audio. I picked up a JBL DSP4086, and a SKAR RP800.1D along with an Infinity Kappa 800W 8" sub and a GP Audio Tru Spec box tuned to 34hz. I just wanted a bit more volume than stock, and to fill in the lows. I have all the cables run, and...

I've heard that there is factory EQ on the S550 Stereo due to the horrible quality of the stock speakers. I have the base system. Things were always extremely harsh on my 2016, but now I've upgraded to the Powerbass OE65C-FD Components and that harshness is still there. This even with a brand...

I installed the scosche dash kit in my 2016 v6 along with an aftermarket head unit. Everything else is working, steering wheel controls, etc.., but the backup cam is not. I contacted crutchfield (where i bought the kit) and they're telling me the backup camera trigger in the scosche kit only...

I bought the ITCFD05B Dash Kit from Crutchfield, along with a Kenwood DDX396, and their "ReadyHarness" option, where they will build the harness for you. I just cut the dash out today. I was hoping to do it with a knife but ended up having to break out the Dremel. It was more daunting than I...

I've had the SLP Loudmouth II for a few years now. Just had the X-pipe installed today. Drone is INSANE between around 1900-2500rpm. Like a drone hotbox inside the entire cabin. Cracking the windows would help with the SLP's alone, but now it's horrible. Sounds very good above that range...

I ordered a Ram Clutch Set with Flywheel for my 2016 3.7, Part #88956FW from a seemingly reputable eBay seller. I was having a hard time finding proper flywheel/pressure plate bolts, so I found it easier to go with RAM, as their set comes with pressure plate bolts, and included the RAM part...

Any reputable shops in Altamonte Springs or near Longwood that can change a clutch for less what I'm expecting the ridiculous quote from the dealer to be? I've heard things about a crank relearn, etc..., as I'd like to go with a solid flywheel, so I'd like a shop that has a history of changing...

For a few months now I've noticed this with my 2016 3.7. If I hold it at a set RPM or slowly increase it below around 2000rpm, there's a very noticeable misfire. You can even see the camera start to shake through part of it. It may still be going on above 2k rpm but it's hard to notice. You can...

I have a 2016 3.7. Over the past few months I've noticed that the passenger side window randomly, sometimes repeatedly cracks itself open, and closed, as if I was opening/closing the door. The interior lights do not turn on as if it was a door sensor problem. At first I thought it stopped after...

I was on the way home from work tonight when weirdness ensued. I had shifted into 2nd gear (manual trans) a bit low, at about 1800RPM. I rolled on the throttle, then suddenly the car bucked as-if I had let off the gas, then quickly blipped it. It then started sputtering and spitting, running...

I had a 98 Z28 Camaro. There is area that looks like frame, but actually supports the bottom of the front fenders. Lifting here will crunch the fender supports. The idiots at Meineke managed to do exactly that, and pushed the lower fender gap about 2.5" away from the body. It took...

I have called 3 different local muffler shops (Central FL), and they all quoted me $150. That seems ridiculous for 2 cuts, 4 welds (pipe + tips), and sliding the mufflers on/off the hangars. The book rate must be 1.5 hours or so, which I also don't believe. What have others paid?

Mine didn't do it on day one, but a few days later, developed a rattle in the passenger side door, on bass heavy tracks, at about mid volume, even with the bass set flat. It can be heard distinctly over music with heavier bass, and lighter highs. As far as I can tell it's not the speaker, and...

I test drove an Ecoboost, and a V6 before deciding on the V6. I noticed that on the Ecoboost, the pedal would start engaging almost immediately, and was very stiff. The v6 engaged high up in the pedal travel, much like the cable driven, 99 Mustang GT I used to own, and was noticeably lighter. Is...

I've been trying to decide on an Axle-Back exhaust for my new V6. Was leaning towards Roush, but then I came across this Pypes system... https://lmr.com/item/PYP-SFM84MS/mustang-street-pro-touring-axle-back-pypes-1516 Other than the clamp on vs welded tips, it looks to be (visually) nearly...

Just picked up a 2016 3.7L M6. I have always liked the Roush Axle-Back sound on the 2011-2014 v6. I have noticed, from videos, that it doesn't sound quite the same on the 2015/2016 v6. It doesn't sound as refined to me. It doesn't have the "GT-R tone" for lack of a better description. Is it...