Information is below, its currently in painted form but has been wrapped 90% of its life as you'll see it black in several of the pictures. Really been babied it's whole life, garage kept every minute and serviced to high standard. Whipple has been on for about 1.5 years and it just got a brand...
I just finished a clutch install, new throwout bearing and stainless line from steeda at the same time. Everything went well the trans slide in easily without bolts.
When I finished I’m pumping the pedal now and have done so now almost 200 times and it’s still not coming back on it’s own and is...
Just finishing up my transmission and the ball and socket style exhaust clamp that’s used on the stock driver side cat pipe pipe that connects it to the mid pipe rusted clean off. Usually stuff is easy to find at fordparts,com but I can’t seem to get this part number anywhere. It appears to be a...
I bought the arp flywheel bolts and I can’t seem to get a straight answer on the torque spec. The stock spec ends up being 59ft/lbs but Cj pony in his video says 74ft/lbs.
Thanks
Hey folks, I broke the small black plastic clip that retains the slave cylinder line in the transmission hole that goes out to the trans line. Anyone have the part # on this?
I received the attached brand new for my upcoming clutch job and it seems to be off-centered and possibly damaged in shipping. Can someone confirm if this seems off?
I’m getting a Mccloud rst twin disk with aluminum flywheel as my stock clutch went out on me. Do I need to order the Mccloud throw out bearing or a new ford one to replace as I do the clutch? I’m just not sure if it’s an item you’d want to replace or if you can use the current one.
Hey folks,
I have the common thud noises and obvious driveline slack that most have. I’ve come to deal with it more or less and MGW and diff bushings help of course.
I was under the car today and noticed a lot of play in the center section of the driveshaft where it goes into the carrier...
I have a Raceseng weighted knob and I love it, I don’t want to get ride of it. It current has an adapter on the stock shaft that allows it to connect. I don’t have the specific size but it’s larger that the stock shaft. I’m thinking standard, would I use the adapter still or could I select an...
Hey folks,
So I’ve had this issue for awhile now, it seems to happen on initial onset of a WOT pull or quick blip of gas at times. I have a whipple Stage 1 with 30k miles on my manual gt pp. It essentially feels sluggish or to not come on right away and then will come on normally after that...
So I have a 15 mustang gt with stage 1 whipple kit with 30k miles. It had stock clutch and seems to start to slip on me.
As I look at the numerous options from Mccloud and spec and others I wonder what is truly necessary when replacing it at my mileage. Do I need a new flywheel with a new...
I have a stage 1 gen 3 on my 15 mustang pp gt and I want to upgrade the power. I do not want to get the whipple stage 2 tune I would like to go custom with PBT or Lund. Obviously I’ll need the larger throttle body and ngauge tuner.
I don’t have plans to run e85 so it’ll be 93 octane. I want to...
So I have a stage 1 kit now, I know down the road I plan on upgrading. Instead of going with the stage 2 upgrade that just retains the flare tool and downloaded tune, I wanted to go with a custom tune.
My big question is what I’ll need to have to actually tune it. My understanding is that the...
So I was emptying my catch can yesterday and notice it smelled a lot like fuel. I didn’t think much of it but then I pulled my dipstick today and noticed the same fuel smell.
Ive installed a whipple supercharger 100 miles ago. My thought is possibly some leaked in there from pulling the old...
I’ve been noticing 2 of my smooth pulleys on my whipple kit seem a bit wobbly. I tried my best to show it on the video but I’ve played with the belt and it’s def not a belt placement issue. When standing above you can see the lateral movement in the pulley.
Is this something I should be...
Hey guys,
So obviously I, like many have ran the stock cats on the headers for some time (27k miles) and just recently whippled. The car sounds great for the last 100 miles with the h pipe to roush quads. Just yesterday as I’m out driving and get on it around 3k I start hearing the landmower...
Hey guys,
So obviously I, like many have ran the stock cats on the headers for some time (27k miles) and just recently whippled. The car sounds great for the last 100 miles with the h pipe to roush quads. Just yesterday as I’m out driving and get on it around 3k I start hearing the landmower...
So I’ve have the stage 3 kit on the car for about a month now and I couldn’t be happier.
Firstly, Shawn is a local New Englander to me and couldn’t have been more helpful. I call and he walked me thru my questions and concerns mainly around the suction now and baffling the tube. He was even...
hey folks,
So I recently finished my stage 1 complete whipple kit install. Everything seems to run great, IC pump is flowing, belts have no sounds and coolant is where it should be/heat is working perfect.
My question is around temps. As I drive around (20-30 min drives) I notice in traffic and...