Ford/Motorcraft Accumulator, part number FR3B-19F565-AB, which looks to fit all 2015+ models, based on Levittown Ford Parts. $25 + shipping
CSF 10761 Condenser with Accumulator, which American Muscle lists as fitting 2015-2019 GT, 2015-2017 V6/GT350. $70 + shipping
Both are new in box and...
I have my hard top with sound deadening headliner for sale. I drove with this on the vehicle for about 1000 highway miles between Philly and Charleston. I drove home, slept, and removed the MIC to install the Bestop Trektop. I liked the MIC top, and it was certainly quieter than my Trektop, but...
I'm in the process of swapping out my leaky composite valve covers with the aluminum covers from the GT500. Unfortunately, when I pulled the dipstick tube, this is all that came out.
The dealer has been into this engine at least twice, replacing valve cover gaskets or doing the valve cover...
Anyone with a 2015-2017 Mustang knows that the rear camera harness is faulty. I've had to fix it twice, and the issue has popped back up again. Ford finally issued a recall for it, driven by the NHTSB. Here's my experience in attempting to get my dealership to resolve the problem. Hell, I posted...
I got the stock PP1 wheels from my 2016 GT/PP available. They've been stored in the wheel boxes that my PP2 wheels came in, but those have disintegrated from the humidity. Wheels are in good used condition, some light scratches and rock chips. No bends, cracks, or curb rash.
No tires included...
I installed the Steeda Adjustable Diff Bushing Insert kit (555-4443) yesterday, and wanted to pass along a couple of tips that will get your install time down from the 4 hours it took me to the 1 hour it SHOULD have taken me. Of note, I also have the Steeda IRS Subframe Alignment Kit, IRS...
Received these as extra items in a lot I purchased from another member here, and I already have them.
Looking to either sell them outright for $160, plus shipping and Paypal fees, or ideally, to trade them for Steeda Rear Adjustable Camber Arms, plus $$$.
Brand new in bag, and they're a pretty...
All -
I'm about to install the Steeda Toe Links and need a better alignment than I trust the national chains to do. If it were my wife's Benz, I'd take it to Karl at European Road and Racing, but he's way too busy to touch a domestic car.
Who's your go-to shop in the Charleston area? I'm close...
I'm waiting on Levittown Ford to ship out my Ford Performance cam covers (M-6067-M52S), as I have the small oil leak at the #8 cylinder, due to the design of the stock cam covers. I saw that some folks have issues with their VCT Solenoids after awhile. I'm at 51k miles.
Does it make sense to...
I just installed a set of GT350 gauges in my 2016 Performance Pack GT. They're working fine, and they light up with a while backlight.
Do these gauges not work with MyColor? I'm unable to change the backlighting, for whatever reason. It's not that big a deal, I just usually keep all my...
$350 + shipping. Recently removed from my GT. There's very light surface scratching on the bigger piece that I tried to capture. It is not very noticeable under all situations. There is one broken tab (thanks, Ford) on the lower right corner.
The Vacuum and Oil Pressure gauges were included...
Admittedly, this isn't about my Mustang, but my Camaro. It rarely gets driven, because it's a giant pain in the butt to get started (big block), and to protect it from my kid and his friends, it sits under a car cover. I keep Damp Rid buckets in the car, but if I don't check it often enough, it...
A buddy is a tech at the local Benz/Jag/Alfa/Porsche dealer and is mounting my Ford Performance PP2 wheels tomorrow. He asked me to bring valve stems, but I honestly have no idea what I need.
Anyone know if these will work?
Sunday morning, I pulled the front of my car apart to install my Big Mouth, as well as my 2018 airbox and intake tube. I pulled off the stock 2016 intake tube, then realized that I had not accounted for the fact that the 2016 has two vacuum connections (in addition to the sound tube), while the...
My back two plug well seals are leaking on the driver's side cylinder head. Does anyone have a shop manual with procedure for this? My car has already had the TSB applied for leaking valve cover gasket, due to too few bolts being installed from the factory.
Thanks,
JR
Hey all -
After about three years, and 25k miles, my AC compressor and/or clutch has failed. Again. This was all replaced under warranty a few years ago, along with the evaporator. The story goes that I started hearing bearing noises, and knew I would need to replace the clutch, at minimum...
I bought a 2018 GT manifold, and the seller included the fuel rail and injectors. Are they worth anything? For reference, these are the top injectors, not the DI injectors.
JR
I was pulling out of my garage earlier, and not paying as much attention as I should have, and this was the result...
The bumper may need to be replaced, though the scratches aren't deep, they just went through the color and clear. The fender likely just needs a respray on the wheel arch...
Today has a new R shirt!
https://www.blipshift.com/products/r-seltongue?utm_source=blipshift+Updates&utm_campaign=adb83f1c49-RSELTONGUE_2020_03_16&utm_medium=email&utm_term=0_0513fd2cb9-adb83f1c49-345825781&mc_cid=adb83f1c49&mc_eid=1f361133a1
JR