Sponsored

Search results

  1. Launching Paxton Car on 2step

    I believe I am ready to make a full big boy pass in the car next weekend. Just wanted to run my plan by you guys and see what you think. Car makes 850 on a Paxton at 7500 RPM. I have BMR lockouts, vert links, drag springs - (stock PP shocks until next round of mods is done) I plan to run...
  2. Baer Drag Brake - Parking Brake

    Has anyone looked at adapting something like the single piston wilwood parking brake to the baer kit? It looks like a relatively simple bracket and possibly custom length cables is all that is needed. http://www.wilwood.com/Calipers/CaliperList.aspx?subname=MC4%20Mechanical I fully intend...
  3. Quick Review: MGW X-Spec

    I have finally started adding the last few things to make my car kind of come together and to also get ready for the upcoming racing season. Some things I just can't put off (new fuel lines, adding a 3rd pumps, etc) and one thing I was on the fence about was a shifter. I am one of the few...
  4. 1000WHP CLUB - NON TURBSKI

    I'm looking to see who all is in the 1000WHP range, preferably on a centri car, and what setups are running at that level. I know what fueling will be needed- got it covered. Essentially just getting an idea of what intake, cams, boost (pulley combo), intercooling, etc, people are running...
  5. Price is Right Dyno!

    Okay, we have two showcases here A) 2015 Base 6R80 GT Paxton 2200SL-open inlet 3.33 E85-Sai Li ID1000 Cat Deletes Redline 8000 DynoJet 3.15 rear PBD Tuned B) 2016 Premium MT82 GT Paxton 2200SL-open inlet 3.33 E85-GT350 Pumps DW95 LT Headers/no cats Redline 7500 DynoJet 3.73 gears Lund...
  6. So, where are my tiny pulley Paxton folks at? 3.33 and smaller

    In my somewhat limited searches there was little info out there about 3.33 setups and essentially none on smaller pullies so where are yous guys? I'm likely to have a greedy moment if boost weather doesn't come soon, just curious on what you guys are running and getting away with (stock motor...
  7. 3.15's MT82 Paxton

    So I visited Mexico last night and ran a buddy of mine with a Paxton/3.33/E85 6R80/3.15/28" tire, no other mods VS my Paxton/3.48/E85 MT82/3.73/27" tire and he pulled me and kept a solid 1-1.5 cars which I couldn't catch from a 60. I had been thinking about a gear swap before this but it...
  8. Open Paxton/Vortech Vacuum Routing Question

    I'm looking to run just a filter/turbo guard on my Paxton setup. I was curious about the DS valve cover and IMRC vacuum routing. I know these two lines run to the factory intake and are tee'd together with the kit, since I won't run an intake tube can I just toss a breather filter on them or run...
  9. Anyone Running Optima/Targa Events?

    I'm looking at taking my build back a notch or two and optimizing my car to run Optima or SCCA style events. Doing so would require taking off much of my aero in favor of more rules compliant parts. I'm just curious if anyone here runs these types of events and how do you like them versus just...
  10. What have you broken or just worn out?

    Like the title says, I'm curious as to what parts seem to have failed prematurely or have just worn out due to HPDE/TT/TA, etc? This doesn't include things like brake pads, although premature clutch failures may fit the bill, you decide. Please be as descriptive as possible and maybe...
  11. Making America Great Again! NEW CPe/LTH Long Tube Headers REVIEW 1 of 3

    I recently installed a set of long tube headers from www.longtubeheaders.com. These headers are made by the same great folks over at CPe. I'm going to review the fit and finish here and describe some tricks or tips, rather, for long tube install on the S550. My next installment will be sound...
  12. Issues running 305/35-19 on 19x10 ET 40 up front?

    Like the title says, car is a PP running BMR performance springs. Just curious as I like the NT05's but want to run a square setup, not sure if the 275's are going to cut it in the back. TIA
  13. Holley Sniper NA dyno

    Cliffs: 427/355 SAE Car is a 3.73 MT82 with CPe/LTH x-pipe and cat back MAK Cat deletes Holley Sniper Intake JLT CAI BAP 47's Lund E85 tune Had to coerce the dyno operator to stay in it, lol. First run he stopped at 6500 thinking he was at 7500. Wanted to try it in 4th as it made him...
  14. Nitrous: Anyone experience false knock?

    Like the title states, I'm looking to brainstorm to help track down a potential false knock issue. -Brisk RR14S @ .030 -NX plate kit- 100 shot for testing -Maximizer 4 controller running each solenoid independently - currently set to spray at 3500, off at 7k. -E85 (quality E85) w/ BAP & 47's...
  15. NEW LTH/CP-e Exhaust

    I recently got my hands on a new exhaust system for the 15-17 GT's. http://longtubeheaders.com/store-long-tube-headers/ It is branded LTH (Long Tube Headers) and is essentially made by CP-e. For those not familiar with CP-e, they have been making products for the past 13 years or so for...
  16. Let's see those Drag Builds

    I'm curious what people are doing cosmetically to their Street/Strip cars. What happened to the good ole days of draglites and cowl hoods? I want a nice spoiler and hood but what I want screams road racer soo.. I'm looking for inspiration! My canvas:
  17. COBB Service

    I recently had a random failure of the data logging function of my AP V3. The device worked perfectly other than when I pushed the button to log, the device would act as off I turned the car off and begin power save shutdown mode. I went through some self diagnostics and then called Cobb...
  18. Wiring diagrams for seats/airbags?

    I have recently replaced my seats with some suede LG1's. I actually used the factory lower rails and made adapters for the new sliders. Pretty trick IMO. Anywho... I was about to start on getting the electronics done to turn the airbag light off. I have a ton of resistors and some plugs that...
  19. Roush Valance WILL fit Non-Premium

    I've checked and double checked both my premium and base bumper as well as my Roush valance. Fitting will require two things: a)Trimming the base bumper at the molded seam all the way across the bumper. b) Using epoxy to mount L-brackets for the Roush extensions. I recommend thin bar-stock...
  20. Aux Fuel Systems - Who, what, how much...

    I'm currently looking for a plug and play system so that I can run straight E85. In this search I suppose I could post up what I know and gather information from others as to what is available for the EBM. So far there are only components that I am aware of: *CP-E: Fuel rail system...


Top