I’m curious how the Mach will respond with boost, haven’t seen results/threads yet. Anyone?
I picked mine up on Thursday, ready for some boost. Thanks!
Hey folks, I made a few pulls on the dyno today while she was still stock. A full American Racing exhaust will be installed in a few days and Ken Bjonnes/Palm Beach Dyno will be doing the tuning. Conditions were terrible, but pretty happy with the #'s, 93 degrees in the shop. I have stock...
Hey folks, I realize the GT350 was not meant for the dragstrip but I always make a few passes in my cars to establish a baseline MPH. I was fairly pleased with her performance, I made 7 consecutive 118mph passes, with a best of 12.1 & 12.2. 60's were challenging, either she'd spin or bog, had...
Hey guys, I'm in the market for a GT 350 and wanted to know diffence between a 16 and 17? I found a 16 with 1100 miles for 54k and considering. Thx for your help!!!
I made a trip to Darlington, SC last night, made a few passes. I'm still working on my 60ft, wasn't able to get her off the line very well, wasn't standing on my 2step long enough to build any boost, thinking about installing a trans brake. Conditions were ok, DA was 1420ft, 79 degrees, and...
Hey folks, I spent the weekend running my car at the WannaGoFast event at Stanly County Airport, New London, NC. I had an absolute blast, by far the most fun I've ever had at a car related event. My car performed amazing, Ken Bjonnes was adjusting my tune between passes, going faster every...
Hey folks, I went to a car show at Pro Dyno on Saturday, decided to make a few pulls while I was there. I filled up on Sheets gas station e85, drove an hour to PD, made these 2 pulls back to back, 20psi was the first then 21psi 2nd pull. She done well :D
Hey folks, I recently made some changes (gear swap) to my car, figured I'd put her on the dyno to check my diagnostics. My new MPR long block now has 1500 miles on her, figured it was time to turn it up. We started out on 12psi 783/720, 15psi 876/811, 18psi 958/883, 20psi 992/900, then maxed...
Hey folks, I recently made a few small changes (3.31's) to my car so I had Ken check my 93 tune. I made 3 dyno pulls, 8, 9, & 10psi, chart listed below.
recap of mods:
Hellion twin 62's, ID1300's, Fore dual pump return style, MPR forged/sleeved long block. I have a 10:1 bottom end so...
Hey Folks, I would like to sell my stock rear differential, aluminum housing and 3.15's, as well as my stock axles. This is from my 15 auto, has 6,200 miles, and several passes at the dragstrip. There are absolutely zero issues with the rear differential or the axles, I will guarantee them...
Hey folks, I wanted to post up some of my recent progress with my build. I previously had a VMP TVS setup that I enjoyed very much, but decided to sell it and go twin turbo. I originally had the twins installed but shortly after had a misunderstanding with my boost controller, hit 20psi and...
I am pulling my ID1000's this week, only used them for less then 50 miles. I'm building my motor and going with 1300's. Let me know if anyone is interested, thanks!
New best today, horrible rainy conditions, was able to make one pass.
Auto/3.15, Stg3 VMP TVS on a 79mm pulley/11psi remotely tuned by Ken Bjonnes. My only other mods are a full kooks exhaust, BMR Performance springs, diff/cradle bushings, vertical links, toe rods, DSS driveshaft...
My local 8th mile dragstrip in Mooresville, NC opened up today, was able to make a few pass's. I have an auto/3.15 with a VMP TVS Stg3 kit with a 79mm pulley/11psi, tuned by Ken Bjonnes remotely, full Kooks exhaust with no cats, BMR toe rods, Performance springs, vertical links, cradle/diff...
Hey guys, wanted to post up my results from today at Rockingham Dragway. I have a 15 Premium Auto with 3.15's, VMP TVS Stg3 kit with a 79mm pulley/11psi, Lund tuned remotely by Ken Bjonnes on 93 pump. I also have a full kooks exhaust with hi flow cats, DSS driveshaft, BMR performance springs...
Hey folks, I had this Bob's Air-to-Oil Separator on for about 90 days, then bought a blower and can't find a place to put it. $175 shipped, comes with the firewall mount, piano black. Paypal ff/gift only, thanks! passenger side.
Picked her up on this week, couldn't be happier. She definitely needs some springs, waiting for BMR to release something. Ordered a full Kooks exhaust, JLT cold air, and a Lund tune, hope to have everything installed soon. Love this new GT!!!