I'm not 100% sure our coil over conversion kit will work with the Steeda camber plates. Our camber plates are designed to fit our custom valved Koni struts(different threaded portion) as well as a 2.5" inner diameter spring.
With the price being a "complete kit" price, it may be easiest to...
There is a huge difference when using our custom valved front struts. The struts are inserts, and mount inside our own shortened strut housings. They are custom valved to match a more aggressive spring rate, and the strut housings include a threaded sleeve with an adjustable spring perch...
I'm sure Bbarfoot14 will chime in, but I can answer these as well.
The ride height is very easy to adjust. You will simply need to jack the car up, loosen the set screw on the adjustable spring perch, and rotate the perch left or right(up or down). It may be helpful to loosen the subframe...
We installed these on stock PP dampers here and the car rode great. We didn't go with too high of spring rates as the car was set up for a daily driver, however it is possible to use this system with the OEM struts/shocks. I would recommend the Koni sports as they are rebound adjustable and...
Thanks for posting the review! I've been telling quite a few customers this would pop up soon. Glad to hear you're happy with the adjustable ride height kit and camber plates, and I'm looking forward to seeing how the new front springs work out.
Thanks again for the pictures, greatly...
We do have softer rates available, however I wouldn't recommend it. We can build the kit to get you to stock ride height, and use different lengths to get you to about -2.5" below stock.
Thanks!
There should be a right height kit install, pictures, and review by next weekend. Another forum member is installing and posting next week.
Have a great weekend!
Perfect! We should be able to set you up with a linear spring no problem! Our camber plates are designed to work with stock size, 60mm, 2.25", and 2.5" springs. I'm almost positive your lower perches are one of those sizes.
Trevor
The conversion kit weighs roughly 20lbs, and rates from ~300lbs up to ~2000lbs are available. However it may take a few weeks for build time on select rates.
The suspension will need to be at full droop in order to adjust the ride height. There is a set screw on the perch that locks it in...
The Roush system includes adjustable ride height, correct? If so, are you able to measure the inside diameter on the bottom of the spring? You should be able to swap out the included spring for a linear spring, and purchase our camber plates with a spring hat to match.
Trevor
Correct. You do not have to modify the strut in order to install threaded sleeves. However, we do offer the option if you would like to remove the OE size spring perch. The option to remove the spring perch will get you further adjustment if you wish to go lower. However, this system can include...
Ground Control S550 Adjustable Right Height Kit
Ground Control Systems is now offering our Adjustable Ride Height Kit for the S550 chassis. This system is designed to work with your stock struts/shocks, as well as most aftermarket dampers. Using custom linear springs, we can include rates to...