Search results

  1. PMAS install issues

    Got it. it looks you aren't using the rubber grommet from the oem airbox in the pic? Only the bolt and a washer?
  2. PMAS install issues

    We changed to the newer style maf because of repeatibility and to eliminate the electronic conversion box that was prone to have issues. We now calibrate OEM maf sensors to work with our housing. I'm not sure what's going on the the hole for the bolt. The factory grommet should fit correctly...
  3. PMAS install issues

    Sorry guys, I've just been made aware of this thread. I think we need to change our wording in the instructions. We meant to remove the plastic fitting with the clip, not to remove the clip from the fitting. I will get this corrected today. I don't have any email from the O.P.? our shop number...
  4. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    We pin them now with allen set screws. We can send a new one out if you are having problems with it.
  5. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    You should have no problem just telling them to make the tune for a stock airbox. It will run fine. Technically they could play with cam timing knowing the intake was less restrictive with the PMAS but I'm not sure if most go that far unless you are spending the whole day on a dyno.
  6. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    We calibrated a maf to make the JLT work with a stock tune the same way we make one work for ours. The JLT picked up 5WHP over stock on a stock car and ours picked up 16 over the JLT on the same stock car.
  7. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    No idea, I didn't do the pulls. I had an independent shop do it.
  8. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    I calibrated a maf to test it against the JLT without a tune. Gains should be similar if not a little more with a tune because it will be making more power and therefore be more restrictive. I'm not sure if anybody has done the test with a tune though. This was on a 13 but the intake kits are...
  9. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    No, ours with a good tune will outperform their kit with a tune.
  10. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    You will always pick up more power with a good tune on top of our intake. The tune just needs to be for the stock airbox. A tune for the ford racing intake would not work. We could always make a maf to work with the ford tune for their intake but I don't think they sell the tune without the intake?
  11. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    Our intake with the GT350 intake manifold and TB should show BIG gains.
  12. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    I have but I assure you it was NOT intentional and it didn't start the pass that way lol
  13. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    Always gotta keep in mind.. for every 1 person with an issue there are 50 without. You just don't hear from the people without problems. Goes for lots of things.. You know the old saying.. no news is good news. lol. I'm also pretty sure that every single person that has had an issue has been...
  14. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    I've done this my whole life and I still have issues with something simple sometimes and have to walk away for a minute.. Come back and try again and it's easy.
  15. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    Give me a min guys.. I'm uploading a video on how to easily get the coupling on. you need to stretch it from the inside. It's a tight fit but it fits. Couplings aren't available in any exact size. We opted for the tight fit over the lose fit. [ame]
  16. PMAS Intake Systems from UPR Products. TUNE AND NO TUNE INTAKES

    These are the instructions everyone should be using.. http://www.pmas-maf.com/wp-content/uploads/2016/02/Pmas-Velocity-Intake-System-Installation-Instructions-2015-5.0_-2.doc


Advertisement
Top