Search results

  1. Gen 3 block swapping a Gen 2

    So what exactly are you guys saying? I am not going crazy horsepower numbers maybe 600 max all motor, would the GT350 heads fit or not? I am looking and I can’t find a kit anywhere, would I need GT350 heads with 5.0 valves retainers lifters etc? The budget isn’t anything out of reach as I have...
  2. Gen 3 block swapping a Gen 2

    woah there guys I wouldn’t even come close to 1000 hp I’m sticking all motor so I don’t need to to worry much about upgrading the internals, when I did the cams and CJ combo I put new oem timing chains, guides, tensioners and I also threw in como cams .550 Max lift valve springs since mine were...
  3. Gen 3 block swapping a Gen 2

    thats something I have not thought about, my original intent on reusing my heads was to save some money but refurbishing them and porting them is going to cost a pretty penny I know. That is something I am going to look into, I didn’t want the Gen 3 heads because I have been hearing it is...
  4. Gen 3 block swapping a Gen 2

    I have not put the car on a dyno yet I hope to soon but I need to fix an O2 sensor that keeps being burnt out but I fully expect around the 500+ WHP range My current actual upgrades are: Steeds cold air VMP twin 69mm tb Ported CJ manifold Comp cams stage 3 NA 52 lb injectors Corsa 1-7/8 headers...
  5. Gen 3 block swapping a Gen 2

    Hello all, I am FBO cammed/CJ combo on my gen 2 but I am up there in mileage now and I was wanting to replace the rings and refresh the motor because I love my NA 8500 rpm build but then a buddy suggested to just Gen 3 swap the block. So I have been wondering has anyone done this? I would want...
  6. GT350 tach to a GT

    I have tried asking around with no responses, I was wondering if anyone has ever swapped a GT350 tach into a GT. I just got my CJ/Cams combo with built top end and valve train and a 8500 rpm limit, I really want a clean look on my tech that is in line with my actual RPM reading and I was wanting...
  7. Could only the GT350 Tachometer be swapped into GT cluster?

    Any updates on this? I have the same CJ/ Cams and built top end and a 8500 limit, I personally don’t mind having the 200mph speedo so I would just plug in the entire dash but were there any issues? My car is a 15 Premium Performance pack so I’m assuming the only option that’s not compatible...
  8. Rear wheel and tire clearance

    Sorry my mistake turns out the tire shop I had mount them pumped it up to 60psi I let some out now handles great and hooks, extremely satisfied
  9. Rear wheel and tire clearance

    Alright so the wheels are on, I have the 19x10 fronts and 19x11 on the Bach with a 285/35 and 325/30 combo but now someone please tell me why I feel some floaty sway feeling coming from the rear and also under acceleration it sways also also u under certain turn angles my traction light comes...
  10. Rear wheel and tire clearance

    So my wheels finally get here tomorrow after months of waiting..... I know I should have asked before but any rubbing?
  11. Flex fuel kits relatability

    I most likely will but the thing I see is it mainly just reads, I honestly don’t care if the running cost more what I want is for the sensor have the ability to identify how much Ethonal is in the tank or octane rating if it’s gas and tell the PCM give this much timing etc so I can make the most...
  12. Flex fuel kits relatability

    Exactly! I want REAL TIME, PRECISE adjustments and on all of the flex fuel kits I see some offer real time reading or sensing but no real real adjusting in timing etc etc to actually make more power on any blend or straight E85 that is what I want and I wanted to know it any of you had one in...
  13. Flex fuel kits relatability

    I think we are on completely different pages lol. I am talking about a flex fuel sensor kit that plugs into the fuel system not a flex fuel tune. Yes I have an Nguage and no I will no longer need it because I am getting my car dyno tuned by someone else entirely now. I am trying to find out if...
  14. Flex fuel kits relatability

    Hello all, Now before I get yelled at saying “yOu DoNt NeEd a fLeX FuEl kIT tO RuN E85”...... I know I am lund flex fuel tuned as of now. But I am looking to make 500whp with a CJ mani and cams combo. I have those parts ready to go but I want the most PRECISE reading and tune for whatever blend...
  15. Highest mileage s550!?

    UPDATE: So my car is now full bolt on flex fuel tune and yes still a daily. My only real issue was that my PCM went wonky and one of my cylinder coils was just constantly being shorted and literally melted. Well it turned out to be a bad PCM apparently water got in it, anywho replaced total was...
  16. DTC code P0354

    That I wouldn’t know how to tell you, I did the simple swapping of coils and spark plugs and it always was an issue with the specific cylinder but then after that I just took it to my local Ford, I’m lucky to have a connect there that told me that’s what the issue was then I got my used pcm and...
  17. DTC code P0354

    Yeah so the PCM was found to have moisture in it, I don’t know from what or where or even how? But that’s what the dealer said. Then warranty did not cover it because I am far out of it as my car had 112k miles at the time. As for pricing I took a used PCM from eBay that I got and I got them to...
  18. DTC code P0354

    Yeah I just checked the wires to the coils and the ones for the cylinder that was melted was always firing, then driving it I just unplugged the coil pack and injector for that cylinder and ran it as a 7 cylinder to the shop because I had to take the car and the pcm there, if you prefer you...
  19. DTC code P0354

    Yeah that’s exactly what happened to mine, it ended up being my actual pcm being fried and sending a constant fire to whatever cylinder. I had to buy a used pcm from eBay, take it to my local Ford and they reprogrammed it to my car with both keys and then I got in touch with my tuner and re...
  20. Premium 15 with stock recarro seats wanting to swap premium H/C seats in

    So not me but a friend wants to trade me MY premium leather power adjustable heated and cooled seats with some cash obviously on top for HIS black leather recaro seats. Now I know this is not a simple unbolt the seats and bolt them on his car, for mine it should be as easy and that. But I was...


Advertisement
Top