Search results

  1. So how many boosted guys running cats?

    Kooks LT with green flow cats into 3inch magnaflow cat back... not issues..
  2. After the Whipple install I noticed wires that are not connected to anything?

    Thank you... and for those that are wondering what they do....
  3. Which Headers to go with?

    Be careful you will be able to pass inspection in your state. I am in NY and had to spend a lot of time and money getting mine to pass... and I ran into a a lot of other people that had to take them off... I went with Kooks with Green flow... I have FI... I would work with a good tuning shop...
  4. whine noise while acceleration

    is this what you are hearing? https://www.bing.com/videos/search?q=5.0+mustang+trubo+sounds&&view=detail&mid=8CADA00609D0B1DC46ED8CADA00609D0B1DC46ED&&FORM=VRDGAR
  5. need help with LUND drain tune.

    ebay, amazon just search "drill pump" if you are in a hurry most HW stores have them too... I would get a spare one if you need to count on it... they don't last long. maybe flushing it our with water can help them last longer. However, for ten bucks I don't even worry about it and just keep a...
  6. whine noise while acceleration

    yup, turbos wine too... go ahead and record it and post it...
  7. need help with LUND drain tune.

    Here is what I do... it is a cheap quick way to drain your fuel... W/O hurting your pump...
  8. Timeline for Remote tuning

    Lund about three days, and 3V. The car also passed NYS inspection a week later... I was very happy... They make very quick work of it... if everything is working as it should on your car. The trouble that most good tuners run into is "something isn't working as it should" on your car. Then you...
  9. My built 6R80 has now broken four times.

    I think this is your best bet, I would also make sure all the lines are flushed out too, before your new install... many shops don't do a good job with this part of the job...
  10. Sputtering at beginning of WOT

    I would change tuners Lund would get back to me on average in less than 2 hours during work hours... and got my car dialed in.., in just 3 tunes over 3 days... and I could also now pass emissions in NYS running LT headers. I used two different tuners before Lund and spent countless hours data...
  11. Bent Rod cylinder 7 L&M Rebuilt

    Isn’t that injector way to small?
  12. Bad tunes from Whipple?

    The whipple kit with all stock parts historically has been the safest fi option in the market. While the motor is out I would take the time to build it right... figure out your goals and budget... PBD and Lund can give you great advice on this... what state do you live in? If you have Emissions...
  13. lund tuning says......too much boost.edelbrock S/C

    I would listen to Lund... they know what they are doing and will keep things safe for you... unless you are a only going to track a car and/or have extra money to burn, why push it... I would rather have less HP and a safer build than more and blow it up... also keep in mind it is more than...
  14. The false knock shell game.

    To me it is more about the time or labor cost... al least it is only one side... so it is about half the time to install... I also bet if you call them they will work a deal out with you... especially if you agree to ship the old one back... I would think they would want to see it...
  15. OBD still reading ”not ready” I have tried everything

    With the Whipple, I know they are very good... I would send them a note, give them all the details of your build and what you have tried... I am sure they will let you know. They told me that they were very confident that they could make it work... but couldn't go as far a as promise me...
  16. OBD still reading ”not ready” I have tried everything

    SCT 4 is what I used... I did read a good thread on the HP Tuners site... it seemed like they had it figured out.... https://forum.hptuners.com/showthread.php?50900-2014-Mustang-GT-Readiness-Monitor/page3 it is a very long thread... but had some interesting points...
  17. OBD still reading ”not ready” I have tried everything

    Lund was able to take care of this VERY quickly for me. Their response time during business hours is VERY fast too, I think they have 5 or 6 full time tuners now... They dialed in the car very quickly and followed a what I would call a safe procedure, while tuning the car... don't get me...
  18. OBD still reading ”not ready” I have tried everything

    Okay... I changed tuners ... and within three tunes over 8 days... on the final tune it only took 21 miles over two days.... and I didn’t do any drive cycles other than go 40 for about 5 mins and for ten mins at 55... Everything set that first day other than the O2’s. the O2 set the next...
  19. Is my BAP bad?Vortech

    I only had it 5 months...
  20. Is my BAP bad?Vortech

    One thing to add to this... I called technical support and they were not helpful on letting me know how to test this BAP either, this thing is $375... I was hoping for better service. Maxflow Fuel Pump Boosters, Ford Mustang Plug And Play Packages 5A102-036 and now the good news: I installed a...


Advertisement
Top