Search results

  1. Engine fuel system issue

    Something easy and simple to try would be a evap purge valve. The purge valve opens when the computer wants the engine to burn the evap fumes from the charcoal canister. When you gas up the tank has to vent fumes as its fills so it vents them through the charcoal canister for emissions. If the...
  2. I DON'T have the tick but I have the 2K Rattle

    I think most peoples 18 and up engine rattles are direct injection. I Think my 16 is piston slap. Before the whipple I had ford pp3 with their tune and intake and rattle was still very well present. I then went Lund tune for pp3 and rattle was the same. Ive tried different oils and weights with...
  3. I DON'T have the tick but I have the 2K Rattle

    My 16 has the 2k rpm rattle and its not direct injected. My rattle goes away when the engine gets really warm. It has almost 30k on it and Ive noticed the rattle at 500 miles ish. It doesnt burn drop of oil, I did compression test at 13k miles and all was good, last 3 oil analysis have come back...
  4. Test

  5. What kind of supercharger should I get?

    This made me laugh cause its kinda what I did. I bought my Whipple stage2 kit from Beefcake during the black Friday sale in 2018. Think it was close to $7500ish. I just installed it myself at the beginning of May. That was alot of time staring at it in my garage. Probably hold the record from...
  6. Surging/Bucking, Cylinder 8 Misfire with P0300 and P0308 Codes

    I think their is a lot on the forums with same codes p0300 and p0308. The codes mean the computer is seeing a random misfire(p0300) and cylinder 8 misfire(p0308). Usually it ends up being the intake manifold causing the problem. The intake manifold has the variable runner flaps that give better...
  7. Whipple Supercharger Pulley Temperature?

    I installed my Whipple stage 2 kit about two weeks ago. I probably have 250 or so miles on it. I'm using a 4" pulley and the 103.3" belt. Anyway after a normal drive without getting into boost, I was checking my bypass valve and accidentally put my forearm on the supercharger pulley and it was...
  8. This just can’t be right... Gear/tranny noise vid.

    My 16 has this noise. Been chasing it for years. Keep updated on what dealer says. Not sure if its the transmission or engine.
  9. Cyl head temp freaking out

    I think its the same on 18's but mine 16 the sensor is located on the back of the passenger side cylinder head under the intake manifold. I just had my transmission out and could see the sensor clear as day. I think at the least the intake manifold has to come off. Check the thread in issues and...
  10. Could the 2018/19 S550 5.0 “rattle” be....

    My 16 has the rattle really bad. I first started noticing it after around 500 miles on it. Starts at 2200 -3000rpm range, and does it on acceleration and deceleration, but worst on deceleration. I remember back in 16 coming onto this forums and searching for noisy lifters thinking the rattle was...
  11. New VMP/Calimer stg1 wont hold 2nd gear

    Purchased a stg1 Calimer mt82 at least 6 months ago, just haven't had a chance to install till this weekend. My original tranny was incredibly noisy and needed a clutch, also had high rpm grind after BG fluid. I'm gonna be doing a Whipple soon so was installing RXT also. Anyway the new tranny...
  12. power packs and 91 gas?

    Your not the only lazy one. I had pp3 in my room for over a year also before I installed it. Now just about a year of driving the pp3 I just received a Whipple stg 2, and now its sitting there. I hope it doesn't take me a year to get around to installing it though...
  13. Loose bolts? Valve cover leak....

    About 2 months ago, my drivers side valve cover started leaking also. Could smell oil burning on my exhaust/converter and was dripping off it. I almost ordered a gasket but checked the bolts first. The back bottom valve cover bolt wasn't even tight, it seemed like it could fall out it was so...
  14. BBQ Tick Solved?

    So the first time I emptied my UPR catch can it had metal in it like the picture. Im pretty sure the metal is from the catch can itself. Probably from machining process. Just didn't clean them that well. By the third time I emptied my UPR can the metal was alot less but still there. I find it...
  15. Just Got Lund Tune Installed

    Sent in a couple logs a few days ago. They looked them over and said everything looks great. I did a idle and cruise and also wot 1st through 3rd.
  16. Just Got Lund Tune Installed

    I have heard a lot of people having issue with the gt350 TB and some tuners. Especially Lund early on. I didn't want to risk having any issues, so just went with the stock. My throttle seems great.
  17. Just Got Lund Tune Installed

    Well, Lund said nothing about logging and sending logs to them after installing tune. Just said theirs your tune and ngauge instructions on loading the tune. I will do a log and send it when it stops raining. Thanks for the info.
  18. Just Got Lund Tune Installed

    yeah im very happy with tune. Just wondering if your supposed to send datalogs for basic email tunes?
  19. Just Got Lund Tune Installed

    So for around a year now, I have had ford racing pp3 and their tune, and just switched too Lund today. I really enjoyed the ford tune, but im gonna install some cat deletes soon and go forced induction, so might as well try Lund out for a bit. I put my stock throttle body back on for Lund tune...
  20. Another engine noise thread

    Ive had a weird noise Ive been chasing forever. It sounds a lot like the 18 rattle. Its gotten worse overtime. From inside the car it sounds like the rattle, but outside with a good wall echo its sounds like tranny to me. Gets a lot better when it warms up. Way worse cold. 1st through 3rd make...


Advertisement
Top