Search results

  1. Help - need instruction for apim as built.

    Trying to load a my18 as built into forscan to use on my15. I am having a couple of issues after syn2/3 swap. Clock reads --:-- even though time is correct, and my heat cool seat buttons don't work on touchscreern. I cant seem to get the file to forscan. Can someone walk me through the steps to...
  2. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    I completely agree with that logic. And I do have much to learn lol. But I keep going back to the fact that a stock GT 350 front wheel is 19"" and my rim is too. So discounting taper for a minute, rotationally there should not be a clearance problem. Now as far as a spacer to fix clearance...
  3. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    Since they are both 19's, would it not come down to offset? Maybe I can use a small spacer to move the wheel away from the caliper?
  4. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    Yep, I have the pp brembos on the front and I don't think that the 350 brembos are much bigger. But you are right, I need to find out.
  5. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    I agree with that logic, and I should be able to just use a spacer to make up the difference if that is true. I guess at that point, my concern would be backspacing. Wouldn't want them to poke.
  6. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    Thanks, I sent him a pm. It's a tangled web we weave. Lol
  7. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    And the gt350 brake setup is about 1/4" wider each side than a gt because of the e- brake setup being inside the rotor the gt has an integrated e- brake using the rear calipers
  8. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    Yep, that's the dilemma. The GT 350 rear is 11" wide. I am changing knuckles, e- brake setup, calipers, rotors,etc. Not a cheap upgrade and while I am going to upgrade the wheels, I want to use mine until I need tires again so I don't take two big hits and have my car on stands while I try to...
  9. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    My rears are 19 x 9.5 with 52.5 mm offset and 186 mm backspacing. I thought I read somewhere that because the embrace setup is different, that everything moved out about 1/4 " each side which I thought would require a spacer on the rear to increase the positive offset?
  10. Need help with understanding my current rear wheel setup from 19X9.5 ET35 & going to 19X10.5 ET22...

    Good stuff guys. Maybe I could gain some knowledge here. I am trying to figure out if my pp1 19"wheels will clear gt350 brakes. I would assume I will need a spacer in the rear but I was thinking my fronts would clear as I have the big brakes already. Since the wheels are the same diameter as the...
  11. Mach 1 VIN 001 sells at Barrett-Jackson auction for $500k

    This was probably purchased by Craig Jackson. As far as I know, he purchased the R and the Bullitt. He has enough stroke that Ford agreed to paint the R whatever color he wanted. He matched a green 65 or 67 shelby notchback of which he also has a red one. I believe those are the only ones made...
  12. Soft heat/cool seat buttons not working

    Hey all, I have done a sync3 version 3.4 on my MY15 GT with MFT. The car is a 400A package. Everything seems to be working great except the soft buttons for my h/c seats. The buttons are present. The hard buttons are working fine. I am familiar with Forscan and have updated everything I needed...
  13. Fitment ?

    Yes, agreed, that's why I was thinking about spacers to move it out to clear the back of the wheel. I was hoping that someone knew how much of a spacer it would take. I wouldn't want to be over 23mm as it puts to much stress on suspension components.
  14. Fitment ?

    Possible for sure. I am doing the whole conversion though. Spindle, hub, rotor, etc and I have not seen anybody with clearance issues in front. I was mostly worried about the rear, I know that the embrace assembly makes it about a 1/4 inch wider each side so I was thinking I would probably have...
  15. Fitment ?

    Anybody......is this thing on ???!!
  16. Fitment ?

    I am upgrading an MY15 gt pp1 to gt350 brakes all around. I have the Brembos on the front so wheel clearance is ok. However, I would like to run the pp1 wheel I currently have on the rear. I will eventually be upgrading the wheel/tire combo but I just put on new as+3's and would like to use them...
  17. Tennessee For sale GT350R Rear seat Delete

    Pm'd you but got no response, I would like to purchase this item. Thanks
  18. California Oem badge delete decklid

    I pm'd you yesterday but got no response, still selling?


Advertisement
Top