Search results

Neutral/foot off the clutch.

He's right, ideally you'd have 0 degrees of cross-camber. In reality, that small amount won't make much difference.

I needed the eraser wheel as well. Goo gone wouldn't touch that diabolical adhesive for me for me. I didn't want to try any stronger solvents. Just keep it moving and if the paint heats up too hot, stop.

Bump for you, but also 25k for an engine replacement? What is that 10k in labor? Thats kookoo. Curious as to why they think you're tuned/ignition counter is low if you're the original owner.

My car came with these but my driver's side one has stopped working a long time ago. Need to take it in to get fixed.

Maybe let the gas sit in there a bit too long :)

Oh dear. Very strange. The mustang might be cooked

What's with the grill lights? They look like those ones people buy off ebay for their 7g mustangs and then post 6 weeks later about how one burned out 🤮

Can you post your alignment sheet?

Man these are just awful sounding cars when you change the exhaust. Even the old school NA i6s kinda sounded bad if you overdid the exhaust on them but nothing like this.

These cars have a pretty high ride height in general, so I’m happy with the height on this kit, never scrape on anything. Can even go up my driveway entrance straight on if I want. Nothing like driving a gt350 where you scrape the crap out of the front fascia everywhere you go. If you add more...

So they "forced a file" in it when the car had a big vacuum leak. Then you fixed the vacuum leak and still have the "forced file" flashed to it? Maybe they changed some parameters based on the vacuum leak and now that the leak is fixed it's all FUBAR and you need to start from step 1. This could...

Can confirm, drove my cousin's 2016 gt350 and really liked the lack of cheesy looking shiny plastic-chrome. The faux toggle switches as well were that darker bronze color.

Yep. Crows feet.

Nice. My driver side one stopped working a long time ago, i should take it in to be fixed. Guessing it's not too well sealed from water.

Get them. But i bet you can find them for around 300. They add a bit of solidity to the steering. Don't even think about doing all this without also doing some subframe reinforcing too.

I get that with my Borla S type at times. Dont remember it happening on the stock mufflers.

You can mix some APC into your car wash soap. Don't go nuts with it and don't let it dwell too long or it will stain trim etc.

The 235s would be fine with the 6 speed, the gearing is looong on the manual transmission with 3.55s and the traction control on these cars is pretty damn good. With an auto i can see it being sketchy if you drop the pedal and it downshifts into 1st. That's not something most people are gonna do...

I’ve always liked Griots Hybrid Ceramic. Comes off easier than turtle wax. Also the marketing team at Turtle Wax needs to lay off the meth. That’s too many words for a single product gimme a break.