Sponsored

Search results

  1. Airbag inserts

    Anyone sell them that go inside the rear coils ? Thanks.

  2. Shenanigans 2024 Edition

    All these runs where with a UGQT 340 tire. No slower than a 12.6. Best MPH was 115.4 . Blistering 2.2 60' 😂

  3. Quality is JOB 1. Are YOU sure Ford ?

    Buddy of mine has a 2024 Mustang, he washed his car (touch less carwash) on a fairly cold day (-15°c) , exited , made a left hand turn, heard a snap and the front driver side collapsed. Long story short, lower a-arm broke and the rotor broke in half. FORD said 5 weeks for parts. This is how it's...

  4. Need these wheels in my life

    The old salt flats w/ knockoffs look.

  5. My Winter Passion : H/O Scale Slot Racing

    Picked up this little beauty today: 1:64 Donahue 1965 Mustang GT350R ! The detail is incredible ! Anybody else into slots ?

  6. Ford Racing M-5300-XA - Front And Rear 1" Lowering Spring Kit

    Anybody know the front/rear spring rates for these ? Thanks.

  7. Changing Trans Fluid again, trying something new (to me).

    So Motul MULTI DCT was on sale at my work, and with my discount I bought 12 1L bottles of it. Over the winter I'm going to change out the trans fluid again (first time at 30k, now at 60k). SO is the Motul MULTI DCT the good stuff for my MT82 ? Thanks :)

  8. 9.01 @ 152 ... New Record on ginormous 6" wide bias plies !

    F.A.S.T. ? Yeah, fast.

  9. I know why the MAF in my PMAS kept coming loose + Fenderwell Install

    Would even have known. Tightened fine, but have a few miles would come loose. Anyways, ordered some rivet nuts and hardware and I'll do both. Never liked the fact one was screwing into plastic in the first place.

  10. Ford Premium Car Cover

    So anywho up here in the great white north this is a 600 dollar 'premium ' car cover. Inside the box there's the cover, and a piece of string to use to secure the cover. No proper tie down cable or storage pouch. Pay a premium price, get the cheapest shit possible.

  11. Can you run a 9.10 1/4 at over 140mph on a STOCK 6" wide Redline ?

    ANd stock intake manifold, & stock iron exhaust logs ... You bet.

  12. Trick Drag Race Suspension vs just Drop Springs

    Found this super interesting.

  13. MAF calculations

    So when calculating size difference in the MAF housing, you'll want to calculate the cross section, correct ? EG: For MAF housing with a diameter of 88.48 mm, the radius is half of the diameter, which is 44.24 mm. Using the formula: A1 = 3.14159 * (44.24 / 2)² ≈ 1527.46 mm² For the MAF housing...

  14. Mustang things

  15. Let's make this influencer clown famous for the WRONG reason

    Jack Doherty #jackass #textinganddriving #mclaren720s

  16. Gotta killer deal on some FORGESTAR wheels

    Forgestar 17x9.5 J with MT ET Street R 305/45R17 tires Forgestar 17x7 J with Cooper cobras 215/55R17 tires Just to be sure, cause I know other 17" wheels clear the BASE BRAKES on my BASE 2017 GT (ie: non-BREMBO). Will these ones clear as well ? I know nothing of Forgestar ... I only know VMS &...

  17. Front strut compression

    If you watch this video, on the 1-2 shift you can see the nose come down fast. Guess I need a front strut with adjustable compression correct ? Or is that purely the spring ? Any recommendations ? Thanks.

  18. Octane/Timing relationships

    So say going from 91 to 93 octane, and all things being equal, how much timing can you add below 4k rpm and above 4k rpm ?

  19. After years and years of ...

    half-assed 91 octane, FINALLY !

  20. PMAS vs Gen3 airbox

    During the test-n-tune portion of cash days, had the opertunity to test the PMAS vs Gen3 airbox on the same tune. All I did was adjust the MAF table to accommodate the Gen3 airbox. The Gen3 airbox was quicker, and MPH better than the PMAS. Keep in mind this was with minimal mods. Same temps...





Top