Search results

Thanks, man. I read the post on the link. Replacing the VCT solenoids on both sides of the engine with Ford Performance ones was the first things I did when I got the car. Had CEL and severe stalling-at-stops issues. The FP ones run so much better than the stock did. Again, true misfires are...

I appreciate you all for the feedback. Lots of options. So here's what my research has yielded reading all the forums and sites related to issues like mine: 1.) Swap the intake (Gen2) manifold for the Gen3 Intake Manifold (2018+) with all the harnesses, and get a custom tune like Lund, but...

No, not tuned that I am aware of. I bought it used. Only mods were Air Raid CAI (I swapped that out for an Injen that doesn't require a tune), Roush Axle backs, RTR rims, and a Jensen center dash radio. Haven't wanted to give it a tune, but if a tuner can perform a cam relearn, I'll look into...

Let me know what the results are. I am wary about dropping the $ on the Gen3 manifold, the additional hardware and a tune. Not looking to blow $1500 on this fix unless I absolutely have to and there's no other alternative. Appreciate the help.

Yeah, been thinking about buying a used Gen2 intake as I really don't want to spend the $ for the harness and wiring extensions needed in the Gen3 manifold. Can you tell me if the lockout is a separate piece of equipment or something the mechanic can do with the new intake? Thanks for the help.

No, clutch is solid and no need to replace. I'll talk to my mechanic and see if they can do a relearn, thanks Would hate to take it to dealership for their markup plus $150 "diagnostics" to tell me what I already know.

I own a '16 GT, so it is the Gen2 Coyote. P0306 and 308 codes thrown a couple months ago. I've got 110k miles on the clock. I did spark plug swaps at 88k with Bosch Double Iridiums. Cleared out the codes fine. A few weeks ago, same codes. Replaced the ignition coils on all eight, checked the...

Yes, the plastic o-ring flew out of the car swapping out the reverse lockout collar. Can't find it online or in any parts catalog. Hoping to find one or even a rubber grommet equivalent.