Search results

Just removed from my car. Works perfect. Wrapped in Tessa tape. $50 shipped. PayPal only.

Delete

Anyone in need of these parts? Cluster has around 55,340 miles on it. Everything worked perfectly when removed. $80 for all shipped in the US.

Well, after finally finishing the entire rear end of the car (Rebuilding IRS) (which turned into a gigantic worm hole) I began working on the front end.. This was originally only going to entail the Steeda Roll Center Correction & Bump Steer kit, and a set of FP FR3 Track Struts, but we know how...

I have the rear cradle out of my car right now, and am in need of a dimension. I'm looking for the distance in-between the subframe (where the forward diff bolts are) and the fuel tank on both sides? It would be best if it was on a setup that has the cradle squared up with alignment bushings...

My car is a 15 PP, and is currently lowered on an Eibach Pro Kit with factory rear shocks, with Eibach bump stops. I am going to be installing the Viking shocks. The shaft diameter of the new Vikings is larger than factory, and therefore the Eibach bump stops won't go on them. What is the...

Super clean build. Bike is in perfect condition with new tires and needs nothing. Pictures don't do it justice. Comes with extras. Asking $9200 OBO. Matte Storm Grey / Matte Ironstone 4,675 Miles Triumph Full Forward Controls Triumph Black Header Pipes & Rings Motone Black Shorty Drag Pipes...

Well that escalated quickly... The car was sitting on it's tires this morning in my garage. Decided to start preparing for install of Steeda Diff Bushings and Through Bolt Kit, amongst other upgrades back there. Long story short, I found myself removing the rear assembly to make my life easier...

Heat and AC has been acting up for a while now. Set the car to 72 and it blows hot, set it to 70 and it blows cold. I knew there was something up with the blend door actuators. Plugged up forscan and checked for codes. Sure enough, drivers side, passenger side, and fresh air. Went to the...

Can someone confirm that the Steeda 555-4051 Through Bolt Kit will work perfectly fine with the Steeda 555-4443 Differential Bushing Inserts? Pics below, just want to confirm they work together. Steeda says the Through Bolt Kit is "intended to be used with the Hardcore Diff Brackets", but I'm...

Starting to collect some items for adding an ESS next year. The M-9593-M55GT 20+ GT500 Injectors are on the list. Looking around, it seems that they are listed as EV14 style pretty much everywhere. Example LMR below: Except on VMP, they list them (same PN) as EV6. Is this a typo or am I...

15-17 Ford Racing by Borla Axle Back Exhaust. In great shape, tips are clean. Includes clamps. Sounds great, just decided to go a different route. $180 PayPal Would like to find a local buyer, but I can work out the shipping if someone is serious.

Just put the 1pc Steeda DS in. Install was not too bad other than dropping the exhaust and those 6 bolts on the pinion flange being a pita. But it went fine. At around 53mph the car develops a deep low hum very aggressively. When I reach 60mph it is at its peak. There is some vibration...

-Kooks 11513200 3" SS Catted Connnection Pipes. 2015-2023 Mustang GT 5.0L These connection pipes have had the catalyst removed, but still retain the cat shells. This gives the appearance of having cats, without the exhaust restriction or risks of failure. Condition is very good. Nothing wrong...

Can anyone tell me what the center to center distance is between the two resonator pipes?

These are Ford OEM HID Projector Headlight assemblies that have had the inner bezels painted black, and the lenses lights smoked. They have Diode Dynamics RGBW Demon Eyes installed DRL in the Projectors. They also have Diode Dynamics RGBW DRL LED Boards installed for the Tri-Bars. In the DD App...