Search results

I noticed this same thing on my Steeda plates this past winter when I was swapping springs. I ordered a new bottom plate from Steeda for $35. I assume it was like this for awhile and it would be okay to leave it but since this is a track car I didn't want to risk it for $35. It took a few...

Yes the QuickFit works with both stock seats or select aftermarket seats. I used it with the leather sofas. I also used a Hans so I got the Pro.

The QuickFit Pro is definitely an improvement over just the 3 point belt but in the end isn't going to be as good as you have in the GT4. I have one up for sale at a good price if you are interested. I am making my PP2 a dedicated track car so I did a roll bar and proper seats this winter.

Price Drop. $300

I installed Race Louvers and also used nuts and bolts. In the case that the layers are close together I was able to just go through both layers with the bolt. In the case that the under layer was further away from the outer skin I was able to get the nut into the gap without much issue. Race...

Ahh I missed that part.

I used a jig saw and the blade was long enough to cut through both the outer and inner layers of the hood. Before you take the hood off mark the hinge locations well to help get the alignment so you don't have to fiddle with getting it aligned when you re-install it.

I bought this in January 24 for track days, and have used it for 4 track weekends this season. Like new condition. I am adding a roll bar, seats and harnesses over the winter so I no longer need this one. Works great for holding you in place way better then stock belts and allows for use of...

I swapped the heated/ventilated/memory seats from my 2020 GT Premium to my son's base 2020 Ecoboost High Output Handling Package (large Sync 3 screen) and it was a straight plug-n-play. We did swap the center bezel for the heat/cool buttons. The car side wiring harnesses were identical.

This may help you out.

Wheel offsets and some tire pictures. How much tread left?

Yep everything listed on the report. I think it was delivered somewhere in Texas if I remember correctly from the Carfax when I bought it last October.

I have the second one of the 2!

I am just getting back into track days this season and tried the Bluestuff front and rear on my PP2. They performed just fine and I didn't have any issues with fade. However, after 3 days they were approx 50% used on the front and 70% used on the rears. I think I did 2 autoX events on them as...

Perhaps FR3Z-5025-A ?

Yes that is a normal price for track insurance. I think Summit is more expensive than other tracks...probably based on the claims there relative to other tracks. I increase the policy to cover the deductible, it's not that big of a cost increase to do that. I used Lockton in April and my...

Are you looking for a trade? I have 2020 leather, memory, heated, cooled I'd trade you.

Hi all, new to the group. Picked up the PP2 last fall to get back into track days. This is the second event with the car feels pretty good. Car: 2020 GT PP2 Camber: -3 Front, -2 Rear (Steeda camber plates) Brakes: ECB Bluestuff front and rear, AP racing R4 Bars: BMR...

I also use SoloStorm with a GoPro and RaceCapture. It's very likely more complex to get setup but provides pretty much the same functionality. However with RaceCapture you can add vehicle data to see brake pressure, throttle application, steering angle, and more to the log traces.

I have a PP2 with stock springs/MagRide and was able to get -3Deg with Steeda plates so I'd expect the same is possible on the Vorshlag plates.