Sponsored

Search results

  1. Are these rear control arm bushings shot?

    Got the car under a lift and noticed the bushings on both sides of my rear lower control arms have cracks in them. see pics below. Do they need to be replaced?
  2. Is deleting the thermostat a good idea?

    I have a heavily modified 2019 Tahoe. It’s got a built motor and a supercharger. Because of this, I’m running a colder thermostat, 160 vs stock 207. The problem though is that the 160 degree thermostats they sell have not been reliable for me at all. I’ve had three fail on me in a row now all...
  3. How to ceramic coat wheels and calipers

    Do you just wash the wheels and apply? Or is there any kind of prep you wanna do like claying? Anyone who’s done this please lmk
  4. Tear in my rear control arm bushing?

    When I was installing lowering springs I noticed this tear in from what I can recall was the rear lower control arm bushing? Does this need to be replaced ? The car only has 14k miles not sure why this happened.
  5. What color should I powder coat my engine?

    I’m having the supercharger/manifold and valve covers powder coated soon. I want red but im torn on whether I should do the supercharger and valve covers both red, or the supercharger red and the valve covers black. I feel like everything red might be too much and the black valve covers will be...
  6. Steeda MT-82 transmission goodies. Should I install?

    Was interested in ordering 3 parts to get my daily driven bullitt shifter feeling the best it can. These three include the tri ax street shifter, transmission mount bushing insert, and the shifter base bushing bracket. Can anyone who has these products lmk if it made a big positive difference...
  7. Repairing a front splitter

    Can you guys think of something I could use to file down this part of my splitter that got hit? It’s barely noticeable but it’d be nice if I could file down and smooth out the parts that are sticking out. Any ideas on what I should use to file down the plastic thats protruding?
  8. How to restore the bullitt exhaust tips?

    Did a paint correction on my car and noticed my exhaust tips are looking a little tired. I know they have a special matte black coating so I was wondering if anyone knew what I should use to get them looking nice again? Can I just use normal polish?
  9. Noise from tranny and clutch pedal vibration

    On my way home today my 2019 bullitt all of a sudden started vibrating through the pedal and making a grinding noise from the transmission whenever I get going out of first or reverse. It shifts gears fine when driving nothing strange there. Now when I let out the clutch and creep forward the...
  10. Replacement oem front splitter

    After work today I noticed some damage on my front splitter. Not sure what happened. It’s going to need to be replaced. Anyone know if ford sells just a replacement bullitt front splitter and what that part number is? I’m hoping the splitter is a separate piece from the front bumper…
  11. What’s the proper way to ground this?

    Doing a wire tuck on my fox body mustang. I relocated the starter solenoid and now I have to make new holes for the screws that mount it which are also where it grounds. The problem is that people told me just putting self tapping screws in there will not be enough. I was told I should grind the...
  12. Curb rash on my wheels, is it fixable?

    Not my proudest moment, but I screwed up and got too close to the garage wall when pulling in. Is this fixable? It’s just on the machined lip. About how much am I looking at in repairs?
  13. Front tire worn down unevenly, why?

    Never noticed anything weird when I’d by driving my car but today I had it parked with the tires turned and I noticed on the inside of the drivers side tire it’s completely worn down. I checked the passenger side front tire and it’s fine. See the picture below. Any idea why this happened? It’s a...
  14. Rear diffuser?

    Anyone throw a rear diffuser on their bullitt? I’m thinking of doing this. Any pics?
  15. Best way to launch?

    How do you guys go about launching your bullitt? I cant get it to not bog on a launch. I usually rev it to about 4k in sport mode traction control on and I release the clutch fast and it always bogs and I smell clutch. what should I do different?
  16. Question for sct bdx owners

    Loaded up my custom tune today. I never got any prompt that said it was saving my stock tune. Does the BDX do this automatically when you program a new tune or did I miss something? Please don’t tell me I lost my stock tune…
  17. Tuning by James steeda tune vs palm beach dyno tune?

    My warranties up and I’m ready to tune my bullitt. Wondering if I should go with the tuning by James steeda tune or a palm beach dyno tune. I’d like to do the tune along with a e85 flex tune. I’d appreciate any advice anyone could give on this. Thanks.
  18. Some questions I have for bullitt owners…

    A couple questions I wanted to ask you guys regarding your bullitts. First off, mine burns oil. My car has about 8k miles and I’ve always ran royal purple synthetic oil. It’s probably been about 9 months since my last oil change and I’ve only put about 2k miles on her and the oil dipstick is...
  19. Does anyone else’s CarPlay not work half the time?

    Ever since I got the car I’ll have my phone plugged in and CarPlay will either work or it will cut in and out constantly between CarPlay and sync. A lot of times the car won’t even go into car play. Does this happen to anyone else? It’s very annoying.
  20. Best sound settings for cars with the B&O system

    Any audiophiles have any good recommendations for the best sounding sound settings for mustangs with the b&o sound system? I listen to all sorts of music from rock to edm to hip hop. I like some bass too.





Top