Search results

I have had the pleasure of owning a really awesome 2018 GT Premium A10 for 5 years now. Have 31K total mileage, been boosted for the past 16K. Engine has been amazing, the Gen3 Coyote is a true gem. Car is solid as rock and has been trouble-free, with one exception. The A10 has been a...

Raybestos offers drop in extra clutch's for the E and F drums for the 10R80. They show one for the D clutch but it's never been listed for purchase. So I contacted Raybestos to find out when this might be available. Person I spoke with said this has been on backorder since 2023, and indicated...

Installed NGK 6510 plugs when I added boost and gapped them at .026". I have 16K with FI and took a buddy for a spin a few weeks ago. Got a CEL. Code P300, random misfires. Plugs looked pretty worn upon inspection. Installed new 6510's at the same gap. No codes during a test run. But I...

My 2018 GT Premium is a weekend "therapy" car. 14K normally aspirated and 16K boosted. Just turned over 30K. Low mileage for sure. Only issue was a fried 10R80 after 7K boosted. Built replacement has been great so far. Otherwise, -0- issues. Been a real solid car so far. Would like to...

I toasted my original 10R80 at 21K (14K non-boosted, 7K boosted) with a P1-X and at an estimated 640 RWHP. No 1/4 mile just highway pulls up to about 140. Bought a VIN correct 10R80 from a Ford dealer and torn it down and did the comprehensive Sun Coast upgrades with the extra E clutch and...

I know the HP Tuners softwares normal tuning pathway for the 10R0 is aimed at modding normal and sport modes simutaneously. I assume this would upgrade both sport modes, i.e. sport and sport plus. Does anyone know for certain? I have reached out to HP Tuners with this question (I have an...

12,000 miles on my 2018 GT with ProCharger P1X. The only issue I have had is about 7K miles the bolts on the tensioner backed off about 1/4 turn. Torqued them to spec no issues to date. Supercharger belt (the one that come with the unit) looks like new. With a 4.63" pulley mine comes on...

Brand new never used 56# injectors with spacers. $125.00 shipped in the continental USA.

Brand new, never installed Manley 5.0 Gen2 and Gen3 rods with ARP bolts. $750.00 shipped within the continental USA.

Brand new, never used Manley forged rods with ARP bolts for the 5.0. $750.00 shipped in the continental USA

I installed a JLT oil catch can about 2.5 years ago on the passenger side when my GT was N/A. Would get about a teaspoon of oil every 3 - 4K miles. Went boosted at 15K and noticed the oil in the catch can began to diminish. I now have just over 23K miles, total. I checked it for the first...

Looking for a set of OEM Ford Motorsport oil pump gears to fit a 2018+. Must be new.

Sooo . . . my trans went kaput after 21K total miles, with about 7K of those boosted. I knew from the beginning of boost this was a possibility. Ordered a new trans from a local Ford Dealer (gave me a discount since I have been a past customer). So I am going to tear down this new Ford...

If anyone has or knows were a rebuildable 10R10 core/trans is, please PM me. Must the 5.0 compatible. I can find lots of 2.3L Turbo Mustang cores, but no luck yet for a 5.0.

My trans worked perfectly for the past 20K miles (21K total miles, 7K with boost). Began with a 5 - 6 flare at lite throttle (shift solenoid issue), then progressed to occasional hard 3 - 4 downshifts (excessive line pressure). I drove it one day and tried drag mode and would bounce from 3 -...

I see there are some companies that offer the ability to tune the trans. Are there proven offerings that allow me to tune my trans independent of of the PCM that really work?

After 21K trouble-free miles my 10R80 has begun having issues. Started with a 5 - 6 flare (free rev between gears), then progressed to a violent slam shift on the 3 - 4. Went 14K miles NA, and just over 6K boosted. Problem does not occur all the time, and only acts up at lite, part throttle...

Looking for some take off L & R hand exhaust manifolds (with Cats attached).

Developed a slight rattle under the car recently. Put it on a lift and we inspected everything under carriage from the front of the engine to the tail pipes and found nothing loose or touching. We tapped the LH side cat and it was solid. Tapped the RH side cat and it sounded different, like...

With my present FI set up I am estimating about 640 - 650 whp. With the addition of LTH's and a proper tune revision, what is a realistic gain at the wheels?