Search results

Hi guys, I'm currently at a track day and I've observed oil leaking out of my intake tube and wetting my air filter. I'm running the gt350 intake from power pack. Have you guys seen this before? My suspicion is the drivers side PCV there is 1 or 2 sustained long right hand turns.

I've been eyeing the M-16600-FP spoiler (swing) for some time. My 17 PP1 has no aero modifications other than maybe a bit of rake from lowering springs. I'm wondering if adding the spoiler before other front aero modifications will upset the aero balance too much? I'd like a splitter but I'd...

Does anyone have the torque spec for the but that holds the catalytic converter to the manifold (part 4 in the photo)? I know most people here are removing their cats and not reinstalling them 😆

Hello, Does anyone with a service manual have the torque spec for the oil cooler bolt (the one that retains the cooler but the filter also threads on to)? 15-17 if that matters. The closest I came was an instruction for the boss 302 cooler at 43lbf-ft (gen 1 coyote, but likely valid - I'm just...

Hello there, I've tried searching to find these photos, but many posts are missing details of suspension setup. I know the 285/35R19 square is a widely recommended setup, but I haven't seen many photos. Right now I'm leaning towards this tire size with a minimum drop springs to clean up the...

Hello there, I'm considering the fact I'll likely need camber plates soon. As I am researching designs, I'm commonly noticing in the popular options the following: the plate where the strut is mounted (IE the one that slides to provide adjustment) is sandwiched between a lower plate with studs...

Hello all, I was running a lapping day Friday and could faintly hear a ticking or tapping noise on right hand turns below is a video of it and you can hear it (microphone is on the back bumper). Any thoughts? The frequency seems higher than wheel rotational speed (but maybe at tread block...

So, I've finally taken my 12000km mustang on track. I (like most here) read these forums and read all the things the car would need or the short comings: oil cooler, diff overheating, track pads, Michelin ps4 or pilot sport tires, sway bars and better spring rates to name a few. Full...

What are you folks using for caliper grease (for slider pins etc)? I have some friends that have found the permatex stuff swells the bushings (lots of comments on the web support this) and has stuck with the ford xg-3-a (our manual makes no reference to this though). I couldn't find any...

Does anyone have any details on the FPRS mustang setup? http://fordperformanceracingschool.com/en/more/fprs-vehicles/142-2015-fprs-mustang-gt.html#!QA1O1021 There was some discussion on tire width here (but nothing conclusive - really curious if they are running the wider rims on the front)...

I've had the car for for 4 months and initially was going to wait until next year but I couldn't resist! The car was more fun than I expected on an autocross course! I came from a dodge neon and I thought it would feel big and heavy at autocross. I was pleasantly surprised at how great it...

Anyone else having an issue with their seatback release slowly indexing forward with each use? Starting in a reclinded position, everytime I cycle the seatback release (the one on the back of the seat) causes the seatback to return to a slightly more upright position than it originally was...

Saw this today: Perhaps this can put some closure on the 10 speed versus 6 speed manual debate* *yes I know these are camaros (which shares auto transmission development with the new mustang), yes I know this is at the hands of a pro driver, and yes I know this debate will continue on :)

With the '18 having a late release date I assume we will have a longer window to order a '17. Does anyone have any reliable information yet on when that window closes? Last year I think it was the first week of March. I'd like to wait a few more weeks if possible to ensure winter will be fine...