Search results

FR3Z6344210CA

Clamps for Installation Required

What's with the Shitting stuff? LOL :shrug::shrug:

For line lock there are several videos on how to use it do a YouTube search for line lock or launch control. will be the same as the 2015+ GT. for Launch control you have to set the RPMs you want to stage at and put the throttle pedal to the floor in a quick motion, And the motor will not go...

What do you mean "Couldn't get it to work"? did you get a Drive mode unavailable? or are you talking about launch control and or line lock?

You would figure that the mechanics that use the OBD II port for diagnosis would require an accurate reading of the fuel pressure

Get a second appraisal from an independent company to help your case.

did you put multiple layers on it?

Does the Pedalmax work with Auto Blip?

First off did you save the original configuration through Forscan? And this will sound silly but were you in reverse when you tested it? did you check if you get the drive mode unavailable with the steering wheel control? the reverse sensors could be the culprit and may need to be disabled if...

This...

Ford has already said that 2018 would be the last year for the GT350, 2019 will be the year of the GT500.

Not if it's a manual transmission

W714972-S300

I think the salesman kept the other key for himself.

Personally, I would get the Track pack, Even if you don't intend to track the car the extra cooling is an good insurance policy especially if you live in warm climates. As far as SYNC 3 is concerned you can piece the system together or buy a complete system from infotainment.com as many of us...

So what was the issue that caused the faulty status led?

Did you get the SYNC 3 from OEMRadio?

The GT350 uses the same panels as any other s550 mustangs, There isn't any made specifically for the GT350

Disconnect the Battery and let it set for about 30 minutes then reconnect it.